# LCR GSM options ################# # Enable debugging of OpenBSC library. # Refer to OpenBSC project for debugging options. # By default, debugging is turned off. #debug DRLL:DCC:DMM:DRR:DRSL:DNM:DSMS:DMNCC:DMNSMS:DPAG:DMUX:DMEAS # Two Loopback interfaces for audio transfer between OpenBSC and mISDN. # The first interface must provide B-channelis for each call mobile call. # The seond interface links them to LCR. # Use 30 B-channels unless you need more due to many TRXs. # -> Load with: "modprobe mISDN_l1loop pri=1 nchannel=30" # By default "mISDN_l1loop.1" and "mISDN_l1loop.2" is used. #interface-bsc mISDN_l1loop.1 #interface-lcr mISDN_l1loop.2 # Give openbsc.cnf config file # It will be located at /usr/local/lcr by default. #config openbsc.cfg # Give database of Home Location Register (HLR) # HLR stores all subscribers. It will be used to grant access to the network. # It is an Sqlite3 database. Refer to OpenBSC project for handling. # The database is located at /usr/local/lcr by default. #hlr hlr.sqlite3 # To keep layer 2 connection to BS11 when quitting, use this option. # It is only usefull for developing. TRX will stay on. # Also changes in frequency, mcc, mnc, lac while keeping layer 2 will cause # malefunction of BSC. # Warning: Keeping layer 2 link may prevent emergency calls. (See below) #keep-l2 # Shutdown on emergency calls: # This option will prevent a shutdown if an emergency call is received. In # case of an emergency, a mobile phone may log onto you GSM network and may # use it to set up an emergency call. # The received emergency call will have 'emergency' as dialed number. But this # number can't be dialed on PSTN networks without chaning. # If you disable shutdown, be sure to provide routing of emergency calls to # emergency facility. If you can't do that, don't touch it! #no-emergency-shutdown # Write BTS-Link traffic to PCAP file. #pcapfile pcap