# interface.conf
################


# Example of an ISDN interface on port 0 used for external calls.

#[Ext]
#extern
#portnum 0

# Example of a multilink ISDN interface (Anlagenanschluss) on port 2
# and 3

#[Ext]
#extern
#portnum 2
#portnum 3


# Example of an PTP ISDN interface on port 0
# Layer-2-Hold is required to keep link alive.

#[Ext]
#extern
#portnum 0
#ptp
#layer2hold yes


# Example of an internal ISDN interface on port 1, which accepts all extensions

#[Int]
#extension
#portnum 1
#nt


# Example of an ISDN interface on port 1, which accepts only extensions
# 201, 202 and 203

#[Int]
#extension
#msn 201,202,203
#portnum 1
#nt


# Example of three ISDN interfaces on port 1, 2 and 3, which accept
# extension 201 on all interfaces, and extension 202 and 203 on the first port
# only.
# Hint: To make extension ring on all three interfaces parallel, use
# "interface Int1,Int2,In3" in extension's settings file.

#[Int1]
#extension
#msn 201,202,203
#portnum 1
#nt

#[Int2]
#extension
#msn 201
#portnum 2
#nt

#[Int3]
#extension
#msn 201
#portnum 3
#nt


# Example of an ISDN interface on port 0 that requires screening of caller IDs.
# This is required if the connected line doesn't screen caller IDs.
# Also this interface will connect bchannel during call setup, so tones are
# required.

#[Ext]
#extern
#screen-out unknown 300  national 21250993300
#screen-out unknown 2*  national 212509932*
#tones yes
#portnum 0


# Example of an ISDN PRI interface on port 0 that has directed channels.
# 10 channels (channel 1-10) are incomming only.
# 10 channels (channel 11-15,17-21) are outgoing only.
# 10 channels (channel 22-31) are both way.
# We prefer to use directed channels first, then we request any channel.
# Outgoing calls on both-way-channels shall be indicated as "any channel".
# (Siemens EWSD will select bot-way-channels when indicated that way.)

#[Ext]
#extern
#portnum 0
#layer2hold
#channel-in 1,2,3,4,5,6,7,8,9,10,22,23,24,25,26,27,28,29,30,31
#channel-out force,11,12,13,14,15,17,18,19,20,21,any


# Example of an ISDN interface that runs in NT-mode, but provides tones during
# setup. Also we provide tones during setup also.
# This is usefull to interconnect to another PBX.
# Additinally the timeout values for the different call states are adjusted to 60 seconds.
# They are: setup, dialing, proceeding, alerting, disconnect

#[PBX]
#portnum 4
#nt
#layer2hold yes
#earlyb yes
#tones yes
#timeouts 60 60 60 60 60


# Example of an interface on port 0 connected to another LCR
# This can be done by direct cross cable (terminated of course) or via L1oIP.
# Since the remote side (NT-mode) normally doesn't accept informations like
# redirected number or display facility, use 'te-special' to even transmit that
# against the ISDN specifications. A remote LCR can handle that.
# Now all information elements can be transmitted in both directions.

#[Ext]
#extern
#portnum 0
#te-special


# Alternatively give port name. You will find the name with 'isdninfo' tool.

#[Int2]
#portname hfc-s_usb.1
#nt


# The remote switch may reject extreamly large numbers to be dialed during
# setup message. Define a limit of maximum numbers to dial. The rest of
# digits will be dialed after setup via overlap dialing.

#[Ext]
#extern
#portnum 0
#dialmax 20


# Example of an ISDN interface on port 1, with alternate tones_dir to use.
# In this case, the tones are "german" tones generated by mISDN_dsp.ko.
# It is possible to give different sample sets, like "tones_german".

#[Int]
#extension
#msn 201,202,203
#tones_dir german
#portnum 1
#nt


# A special case for GSM Network interface.
# You may add 'extension' and 'msn' keywords to turn all your subscribers
# in you GSM network to internal 'extensions'.
# The MSN numbers will equal the subscriber number.
#[GSM]
#gsm-bs
#tones yes
#earlyb no


# A special case for GSM Mobile Station interface.
# give "gsm-ms <name of mobile instance>".
# You may add 'extern' to make this interface the external line by default.
#[GSM]
#gsm-ms 1
#tones no
#earlyb yes
##extern


# Use chan_lcr (Asterisk PBX interface) as internal interface.
# The interface requires mISDN_l1loop.ko to be loaded:
#  modprobe mISDN_l1loop nchannel=8 # use up to 8 b-channels
# The caller ID is used as extension, if "extension" parameter is given.
# Use "screen-in % xxx" to modify any caller id to xxx.
# An internal extension does not receive tones ("earlyb"), but sends them. 
#[ast]
#remote asterisk
#extension
##screen-in % 209
#earlyb no
#tones yes


# Use Sofia-SIP as SIP point-to-point interface
#[sip]
#sip <local ip> <remote ip>
#sip 10.0.0.12 10.0.0.34
#earlyb no
#tones no


# Hint: Enter "lcr interface" for quick help on interface options.


# Add your interfaces here:


[Ext]
extern
portnum 0


[Int]
extension
msn 200,201,202,203
portnum 1
nt