memcpy(&e_redirinfo, ¶m->setup.redirinfo, sizeof(e_redirinfo));
memcpy(&e_capainfo, ¶m->setup.capainfo, sizeof(e_capainfo));
e_dtmf = param->setup.dtmf;
-
/* screen incoming caller id */
interface = interface_first;
while(interface)
/* turn off dtmf detection, in case dtmf is sent with keypad information */
if (e_dtmf)
{
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) received dialing information, so dtmf is now disabled, to prevent double detection by keypad+dtmf.\n", ea_endpoint->ep_serial, param->information.id, e_ext.number, e_callerinfo.id);
+ trace_header("DTMF (disabling due to keypad)", DIRECTION_IN);
+ end_trace();
e_dtmf = 0;
}
}
/* keypad when connected */
- if (e_state == EPOINT_STATE_CONNECT && e_ext.keypad)
+ if (e_state == EPOINT_STATE_CONNECT)
{
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) keypad information received during connect: %s.\n", ea_endpoint->ep_serial, param->information.id);
- /* processing keypad function */
- if (param->information.id[0] == '0')
+ if (e_ext.keypad)
{
- hookflash();
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) keypad information received during connect: %s.\n", ea_endpoint->ep_serial, param->information.id);
+ /* processing keypad function */
+ if (param->information.id[0] == '0')
+ {
+ hookflash();
+ }
+ if (param->information.id[0])
+ keypad_function(param->information.id[0]);
+ } else
+ {
+ trace_header("DTMF (not enabled by extension's settings)", DIRECTION_IN);
+ end_trace();
}
- if (param->information.id[0])
- keypad_function(param->information.id[0]);
return;
}
if (e_state != EPOINT_STATE_IN_OVERLAP)
{
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) ignored because we are not in overlap, or connect state.\n", ea_endpoint->ep_serial);
+ trace_header("DTMF (ignored, not connected and not dialing)", DIRECTION_IN);
+ end_trace();
return;
}
if (!param->information.id[0])
/* port MESSAGE_DTMF */
void EndpointAppPBX::port_dtmf(struct port_list *portlist, int message_type, union parameter *param)
{
- trace_header("DTMF", DIRECTION_IN);
- add_trace("digit", NULL, "%c", param->dtmf);
- end_trace();
/* only if dtmf detection is enabled */
if (!e_dtmf)
{
- PDEBUG(DEBUG_EPOINT, "dtmf detection is disabled\n");
+ trace_header("DTMF (disabled)", DIRECTION_IN);
+ end_trace();
return;
}
+ trace_header("DTMF", DIRECTION_IN);
+ add_trace("digit", NULL, "%c", param->dtmf);
+ end_trace();
#if 0
NOTE: vbox is now handled due to overlap state
port_resume(portlist, message_type, param);
break;
+ /* port assigns bchannel */
+ case MESSAGE_BCHANNEL: /* indicates the assigned bchannel */
+ case MESSAGE_BCHANNEL_FREE: /* requests bchannel back (e.g. when call is holded) */
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received bchannel assignment.\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
+ /* only one port is expected to be connected to bchannel */
+ message = message_forward(ea_endpoint->ep_serial, ea_endpoint->ep_join_id, EPOINT_TO_JOIN, param);
+ logmessage(message->type, &message->param, portlist->port_id, DIRECTION_IN);
+ break;
+
+
default:
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received a wrong message: %d\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id, message);
}
}
/* join MESSAGE_DISCONNECT MESSAGE_RELEASE */
-void EndpointAppPBX::join_disconnect_release(struct port_list *portlist, int message_type, union parameter *param)
+void EndpointAppPBX::join_disconnect_release(int message_type, union parameter *param)
{
char cause[16];
struct message *message;
+ struct port_list *portlist = NULL;
/* be sure that we are active */
if (e_state==EPOINT_STATE_IN_OVERLAP)
{
new_state(EPOINT_STATE_IN_PROCEEDING);
- if (portlist)
+ if (ea_endpoint->ep_portlist)
{
- message = message_create(ea_endpoint->ep_serial, portlist->port_id, EPOINT_TO_PORT, MESSAGE_PROCEEDING);
+ message = message_create(ea_endpoint->ep_serial, ea_endpoint->ep_portlist->port_id, EPOINT_TO_PORT, MESSAGE_PROCEEDING);
message_put(message);
- logmessage(message->type, &message->param, portlist->port_id, DIRECTION_OUT);
+ logmessage(message->type, &message->param, ea_endpoint->ep_portlist->port_id, DIRECTION_OUT);
}
/* caused the error, that the first knock sound was not there */
/* set_tone(portlist, "proceeding"); */
/* send display of powerdialing */
if (e_ext.display_dialing)
{
+ portlist = ea_endpoint->ep_portlist;
while (portlist)
{
message = message_create(ea_endpoint->ep_serial, portlist->port_id, EPOINT_TO_PORT, MESSAGE_NOTIFY);
}
/* send disconnect message */
SCPY(e_tone, cause);
+ portlist = ea_endpoint->ep_portlist;
while(portlist)
{
set_tone(portlist, cause);
case MESSAGE_DISCONNECT: /* call disconnect */
case MESSAGE_RELEASE: /* call releases */
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received %s with cause %d location %d\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id, (message_type==MESSAGE_DISCONNECT)?"disconnect":"release", param->disconnectinfo.cause, param->disconnectinfo.location);
- join_disconnect_release(portlist, message_type, param);
+ join_disconnect_release(message_type, param);
break;
/* CALL sends SETUP message */
case MESSAGE_SETUP:
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint received setup from terminal='%s',id='%s' to id='%s' (dialing itype=%d)\n", ea_endpoint->ep_serial, param->setup.callerinfo.extension, param->setup.callerinfo.id, param->setup.dialinginfo.id, param->setup.dialinginfo.itype);
join_setup(portlist, message_type, param);
- return;
break;
/* CALL sends special mISDNSIGNAL message */
join_mISDNsignal(portlist, message_type, param);
break;
+ /* call requests bchannel */
+ case MESSAGE_BCHANNEL: /* indicates the need of own bchannel access */
+ case MESSAGE_BCHANNEL_FREE: /* indicates that the bchannel is free */
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received bchannel request.\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
+ /* only one port is expected to be connected to bchannel */
+ if (!portlist)
+ break;
+ if (portlist->next)
+ break;
+ e_join_pattern = 1;
+ SCPY(e_tone, "");
+ set_tone(portlist, NULL);
+ message = message_forward(ea_endpoint->ep_serial, portlist->port_id, EPOINT_TO_PORT, param);
+ logmessage(message->type, &message->param, portlist->port_id, DIRECTION_OUT);
+ break;
+
/* CALL has pattern available */
case MESSAGE_PATTERN: /* indicating pattern available */
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received pattern availability.\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
end_trace();
break;
+ case MESSAGE_BCHANNEL:
+ case MESSAGE_BCHANNEL_FREE:
+ trace_header("BCHANNEL", dir);
+ if (param->bchannel.addr)
+ add_trace("address", NULL, "%x", param->bchannel.addr);
+ end_trace();
+ break;
+
default:
PERROR("EPOINT(%d) message not of correct type (%d)\n", ea_endpoint->ep_serial, message_type);
}
projects / lcr.git / blobdiff