e_ext.rights = 4; /* international */
e_ext.rxvol = e_ext.txvol = 256;
e_state = EPOINT_STATE_IDLE;
- e_terminal[0] = '\0';
- e_terminal_interface[0] = '\0';
+ e_ext.number[0] = '\0';
+ e_extension_interface[0] = '\0';
memset(&e_callerinfo, 0, sizeof(struct caller_info));
memset(&e_dialinginfo, 0, sizeof(struct dialing_info));
memset(&e_connectinfo, 0, sizeof(struct connect_info));
}
+/*
+ * trace header for application
+ */
+void EndpointAppPBX::trace_header(char *name, int direction)
+{
+ char msgtext[sizeof(trace.name)];
+
+ SCPY(msgtext, name);
+
+ /* init trace with given values */
+ start_trace(e_serial,
+ NULL,
+ nationalize(e_callerinfo.id, e_callerinfo.ntype),
+ e_dialinginfo.number,
+ direction,
+ CATEGORY_EP,
+ e_serial,
+ msgtext);
+}
+
+
EPOINT_STATE_NAMES
/* set new endpoint state
*/
void EndpointAppPBX::new_state(int state)
{
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) new state %s --> %s\n", ea_endpoint->ep_serial, state_name[e_state], state_name[state]);
+#if 0
+ if (e_state != state)
+ {
+ trace_header("NEW STATE", DIRECTION_NONE);
+ add_trace("state", "old", "%s", state_name[e_state]);
+ add_trace("state", "new", "%s", state_name[state]);
+ end_trace();
+ }
+#endif
e_state = state;
}
memcpy(&e_callbackinfo, &e_callerinfo, sizeof(e_callbackinfo));
memset(&e_dialinginfo, 0, sizeof(e_dialinginfo));
/* create dialing by callerinfo */
- if (e_terminal[0] && e_terminal_interface[0])
+ if (e_ext.number[0] && e_extension_interface[0])
{
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) preparing callback to internal: %s interface %s\n", ea_endpoint->ep_serial, e_terminal, e_terminal_interface);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) preparing callback to internal: %s interface %s\n", ea_endpoint->ep_serial, e_ext.number, e_extension_interface);
/* create callback to the current terminal */
- SCPY(e_dialinginfo.number, e_terminal);
- SCPY(e_dialinginfo.interfaces, e_terminal_interface);
+ SCPY(e_dialinginfo.number, e_ext.number);
+ SCPY(e_dialinginfo.interfaces, e_extension_interface);
e_dialinginfo.itype = INFO_ITYPE_ISDN_EXTENSION;
e_dialinginfo.ntype = INFO_NTYPE_UNKNOWN;
} else
{
/* we must be in a call, in order to send messages to the call */
- if (e_terminal[0] == '\0')
+ if (e_ext.number[0] == '\0')
{
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) IGNORING keypad received not from extension.\n", ea_endpoint->ep_serial);
return;
if (!strcasecmp(interface->name, ifname))
{
/* found explicit interface */
- printlog("%3d interface %s found as given\n", ea_endpoint->ep_serial, ifname);
+ trace_header("CHANNEL SELECTION (found interface)", DIRECTION_NONE);
+ add_trace("interface", NULL, "%s", ifname);
+ end_trace();
goto found;
}
if (!interface->extension)
{
/* found non extension */
- printlog("%3d interface %s found, that is not an extension\n", ea_endpoint->ep_serial, interface->name);
+ trace_header("CHANNEL SELECTION (found non extension interface)", DIRECTION_NONE);
+ add_trace("interface", NULL, "%s", interface->name);
+ end_trace();
goto found;
}
}
if (!interface->ifport)
{
/* no ports */
- printlog("%3d interface %s has no active ports, skipping.\n", ea_endpoint->ep_serial, interface->name);
+ trace_header("CHANNEL SELECTION (interface has no active ports, skipping)", DIRECTION_NONE);
+ add_trace("interface", NULL, "%s", interface->name);
+ end_trace();
interface = interface->next;
goto checknext;
}
ifport_start = ifport_start->next;
i++;
}
- printlog("%3d starting with port#%d position %d (round-robin)\n", ea_endpoint->ep_serial, ifport_start->portnum, index);
+ trace_header("CHANNEL SELECTION (starting round-robin)", DIRECTION_NONE);
+ add_trace("port", NULL, "%d", ifport_start->portnum);
+ add_trace("position", NULL, "%d", index);
+ end_trace();
}
/* loop ports */
/* see if port is available */
if (!ifport->mISDNport)
{
- printlog("%3d port#%d position %d is not available, skipping.\n", ea_endpoint->ep_serial, ifport->portnum, index);
+ trace_header("CHANNEL SELECTION (port not available, skipping)", DIRECTION_NONE);
+ add_trace("port", NULL, "%d", ifport->portnum);
+ add_trace("position", NULL, "%d", index);
+ end_trace();
goto portbusy;
}
mISDNport = ifport->mISDNport;
/* see if port is administratively blocked */
if (ifport->block)
{
- printlog("%3d port#%d position %d is administratively blocked, skipping.\n", ea_endpoint->ep_serial, ifport->portnum, index);
+ trace_header("CHANNEL SELECTION (port blocked by admin, skipping)", DIRECTION_NONE);
+ add_trace("port", NULL, "%d", ifport->portnum);
+ add_trace("position", NULL, "%d", index);
+ end_trace();
goto portbusy;
}
/* see if link is up */
if (mISDNport->ptp && !mISDNport->l2link)
{
- printlog("%3d port#%d position %d is ptp but layer 2 is down.\n", ea_endpoint->ep_serial, ifport->portnum, index);
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) skipping because it is PTP with L2 down\n", ea_endpoint->ep_serial);
+ trace_header("CHANNEL SELECTION (port is ptp with layer 2 down, skipping)", DIRECTION_NONE);
+ add_trace("port", NULL, "%d", ifport->portnum);
+ add_trace("position", NULL, "%d", index);
+ end_trace();
goto portbusy;
}
if (mISDNport->b_port[i] == NULL)
{
*channel = i+1+(i>=15);
- printlog("%3d port#%d position %d selecting free channel %d\n", ea_endpoint->ep_serial, ifport->portnum, index, *channel);
+ trace_header("CHANNEL SELECTION (selecting free channel)", DIRECTION_NONE);
+ add_trace("port", NULL, "%d", ifport->portnum);
+ add_trace("position", NULL, "%d", index);
+ add_trace("channel", NULL, "%d", *channel);
+ end_trace();
break;
}
i++;
{
break; /* all channel in use or reserverd */
}
- printlog("%3d port#%d position %d using with 'any channel'\n", ea_endpoint->ep_serial, ifport->portnum, index);
+ trace_header("CHANNEL SELECTION (using 'any channel')", DIRECTION_NONE);
+ add_trace("port", NULL, "%d", ifport->portnum);
+ add_trace("position", NULL, "%d", index);
+ end_trace();
*channel = SEL_CHANNEL_ANY;
break;
case CHANNEL_NO: /* call waiting */
- printlog("%3d port#%d position %d using with 'no channel'\n", ea_endpoint->ep_serial, ifport->portnum, index);
+ trace_header("CHANNEL SELECTION (using 'no channel', call-waiting)", DIRECTION_NONE);
+ add_trace("port", NULL, "%d", ifport->portnum);
+ add_trace("position", NULL, "%d", index);
+ end_trace();
*channel = SEL_CHANNEL_NO;
break;
if (mISDNport->b_port[i] == NULL)
{
*channel = selchannel->channel;
- printlog("%3d port#%d position %d selecting given channel %d\n", ea_endpoint->ep_serial, ifport->portnum, index, *channel);
+ trace_header("CHANNEL SELECTION (selecting given channel)", DIRECTION_NONE);
+ add_trace("port", NULL, "%d", ifport->portnum);
+ add_trace("position", NULL, "%d", index);
+ add_trace("channel", NULL, "%d", *channel);
+ end_trace();
break;
}
break;
return(mISDNport);
}
- printlog("%3d port#%d position %d skipping, because no channel found.\n", ea_endpoint->ep_serial, ifport->portnum, index);
+ trace_header("CHANNEL SELECTION (skipping, no channel found)", DIRECTION_NONE);
+ add_trace("port", NULL, "%d", ifport->portnum);
+ add_trace("position", NULL, "%d", index);
+ end_trace();
portbusy:
/* go next port, until all ports are checked */
while(atemp)
{
if (atemp != this)
- if (!strcmp(atemp->e_terminal, e_terminal))
+ if (!strcmp(atemp->e_ext.number, e_ext.number))
break;
atemp = atemp->next;
}
{
if (checkapp != this) /* any other endpoint except our own */
{
- if (!strcmp(checkapp->e_terminal, e_terminal))
+ if (!strcmp(checkapp->e_ext.number, e_ext.number))
{
/* present to forwarded party */
if (e_ext.anon_ignore && e_callerinfo.id[0])
mISDNport = hunt_port(ifname, &channel);
if (!mISDNport)
{
- printlog("%3d endpoint INTERFACE '%s' not found or busy\n", ea_endpoint->ep_serial, ifname);
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) given interface: '%s' not found or too busy to accept calls.\n", ea_endpoint->ep_serial, e_ext.interfaces);
+ trace_header("INTERFACE (not found or busy)", DIRECTION_NONE);
+ add_trace("interface", NULL, "%s", ifname);
+ end_trace();
continue;
}
/* creating INTERNAL port */
memcpy(&message->param.setup.redirinfo, &e_redirinfo, sizeof(struct redir_info));
memcpy(&message->param.setup.callerinfo, &e_callerinfo, sizeof(struct caller_info));
memcpy(&message->param.setup.capainfo, &e_capainfo, sizeof(struct capa_info));
-//terminal SCPY(message->param.setup.from_terminal, e_terminal);
+//terminal SCPY(message->param.setup.from_terminal, e_ext.number);
//terminal if (e_dialinginfo.number)
//terminal SCPY(message->param.setup.to_terminal, e_dialinginfo.number);
/* handle restricted caller ids */
{
/* only if vbox should be dialed, and terminal is given */
earlyb = 0;
- if (!strcmp(p, "vbox") && e_terminal[0])
+ if (!strcmp(p, "vbox") && e_ext.number[0])
{
/* go to the end of p */
p += strlen(p);
break;
}
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) allocated port %s\n", ea_endpoint->ep_serial, port->p_name);
- UCPY(cfp, e_terminal); /* cfp or any other direct forward/vbox */
+ UCPY(cfp, e_ext.number); /* cfp or any other direct forward/vbox */
} else
{
cfp[0] = '\0';
/* if PTP, skip all down links */
if (mISDNport->ptp && !mISDNport->l2link)
{
- printlog("%3d endpoint INTERFACE Layer 2 of interface '%s' is down.\n", ea_endpoint->ep_serial, mISDNport->interface_name);
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) skipping because it is PTP with L2 down\n", ea_endpoint->ep_serial);
+ trace_header("INTERFACE (layer 2 is down)", DIRECTION_NONE);
+ add_trace("interface", NULL, "%s", mISDNport->interface_name);
+ end_trace();
mISDNport = mISDNport->next;
continue;
}
}
if (use >= mISDNport->b_num)
{
- printlog("%3d endpoint INTERFACE Interface '%s' has no free channel.\n", ea_endpoint->ep_serial, mISDNport->interface_name);
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) skipping because it is not single link port_list NT-modem OR no channel available.\n", ea_endpoint->ep_serial);
+ trace_header("INTERFACE (no free channel)", DIRECTION_NONE);
+ add_trace("interface", NULL, "%s", mISDNport->interface_name);
+ end_trace();
mISDNport = mISDNport->next;
continue;
}
}
/* found interface */
- printlog("%3d endpoint INTERFACE Interface '%s' found for external call.\n", ea_endpoint->ep_serial, mISDNport->interface_name);
+ trace_header("INTERFACE (found)", DIRECTION_NONE);
+ add_trace("interface", NULL, "%s", mISDNport->interface_name);
+ end_trace();
break;
}
mISDNport = mISDNport->next;
} else
{
port = NULL;
- printlog("%3d endpoint INTERFACE External interface not found or busy.\n", ea_endpoint->ep_serial);
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) given interface: '%s' too busy to accept calls.\n", ea_endpoint->ep_serial, e_dialinginfo.interfaces[0]?e_dialinginfo.interfaces:"any interface");
+ trace_header("INTERFACE (too busy)", DIRECTION_NONE);
+ add_trace("interface", NULL, "%s", e_dialinginfo.interfaces[0]?e_dialinginfo.interfaces:"any interface");
+ end_trace();
}
}
if (!port)
if (e_ext.clip==CLIP_HIDE && port->p_type!=PORT_TYPE_VBOX_OUT)
{
SCPY(message->param.setup.callerinfo.id, e_ext.callerid);
- SCPY(message->param.setup.callerinfo.intern, e_terminal);
+ SCPY(message->param.setup.callerinfo.intern, e_ext.number);
message->param.setup.callerinfo.ntype = e_ext.callerid_type;
message->param.setup.callerinfo.present = e_ext.callerid_present;
}
memcpy(&message->param.setup.capainfo, &e_capainfo, sizeof(struct capa_info));
-//terminal SCPY(message->param.setup.from_terminal, e_terminal);
+//terminal SCPY(message->param.setup.from_terminal, e_ext.number);
//terminal if (e_dialinginfo.number)
//terminal SCPY(message->param.setup.to_terminal, e_dialinginfo.number);
/* handle restricted caller ids */
/* now we have all ports created */
if (!anycall)
{
- printlog("%3d endpoint INTERFACE No port or no parallel forwarding defined. Nothing to call to.\n", ea_endpoint->ep_serial);
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) no port or no cfp defined for extension, nothing to dial.\n", ea_endpoint->ep_serial);
+ trace_header("INTERFACE (no extension's interface)", DIRECTION_NONE);
+ end_trace();
if (!ea_endpoint->ep_call_id)
break;
release(RELEASE_ALL, LOCATION_PRIVATE_LOCAL, cause, LOCATION_PRIVATE_LOCAL, CAUSE_NORMAL); /* RELEASE_TYPE, call, port */
/* if PTP, skip all down links */
if (mISDNport->ptp && !mISDNport->l2link)
{
- printlog("%3d endpoint INTERFACE Layer 2 of interface '%s' is down.\n", ea_endpoint->ep_serial, mISDNport->interface_name);
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) skipping because it is PTP with L2 down\n", ea_endpoint->ep_serial);
+ trace_header("INTERFACE (layer 2 is down)", DIRECTION_NONE);
+ add_trace("interface", NULL, "%s", mISDNport->interface_name);
+ end_trace();
mISDNport = mISDNport->next;
continue;
}
}
if (use >= mISDNport->b_num)
{
- printlog("%3d endpoint INTERFACE Interface '%s' has no free channel.\n", ea_endpoint->ep_serial, mISDNport->interface_name);
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) skipping because it is not single link port_list NT-modem OR no channel available.\n", ea_endpoint->ep_serial);
+ trace_header("INTERFACE (no free channel)", DIRECTION_NONE);
+ add_trace("interface", NULL, "%s", mISDNport->interface_name);
+ end_trace();
mISDNport = mISDNport->next;
continue;
}
}
/* found interface */
- printlog("%3d endpoint INTERFACE Interface '%s' found for external call.\n", ea_endpoint->ep_serial, mISDNport->interface_name);
+ trace_header("INTERFACE (found)", DIRECTION_NONE);
+ add_trace("interface", NULL, "%s", mISDNport->interface_name);
+ end_trace();
break;
}
mISDNport = mISDNport->next;
}
if (!mISDNport)
{
- printlog("%3d endpoint INTERFACE External interface not found or busy.\n", ea_endpoint->ep_serial);
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) given interface: '%s' too busy to accept calls.\n", ea_endpoint->ep_serial, e_dialinginfo.interfaces[0]?e_dialinginfo.interfaces:"any interface");
+ trace_header("INTERFACE (too busy)", DIRECTION_NONE);
+ add_trace("interface", NULL, "%s", e_dialinginfo.interfaces[0]?e_dialinginfo.interfaces:"any interface");
+ end_trace();
goto check_anycall_extern;
}
/* creating EXTERNAL port*/
port = new Pdss1((mISDNport->ntmode)?PORT_TYPE_DSS1_NT_OUT:PORT_TYPE_DSS1_TE_OUT, mISDNport, portname, &port_settings);
if (!port)
{
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) no external port available\n", ea_endpoint->ep_serial);
- goto check_anycall_extern;
+ PERROR("EPOINT(%d) no memory for external port, exitting\n", ea_endpoint->ep_serial);
+ exit(-1);
}
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) created port %s\n", ea_endpoint->ep_serial, port->p_name);
memset(&dialinginfo, 0, sizeof(dialinginfo));
memcpy(&message->param.setup.redirinfo, &e_redirinfo, sizeof(struct redir_info));
memcpy(&message->param.setup.callerinfo, &e_callerinfo, sizeof(struct caller_info));
memcpy(&message->param.setup.capainfo, &e_capainfo, sizeof(struct capa_info));
-//terminal SCPY(message->param.setup.from_terminal, e_terminal);
+//terminal SCPY(message->param.setup.from_terminal, e_ext.number);
//terminal if (e_dialinginfo.number)
//terminal SCPY(message->param.setup.to_terminal, e_dialinginfo.number);
/* handle restricted caller ids */
/* now we have all ports created */
if (!anycall)
{
- printlog("%3d endpoint INTERFACE No free port found for making any call.\n", ea_endpoint->ep_serial);
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) no port found which is idle for at least one number\n", ea_endpoint->ep_serial);
+ trace_header("INTERFACE (no free ports found)", DIRECTION_NONE);
+ end_trace();
if (!ea_endpoint->ep_call_id)
break;
release(RELEASE_ALL, LOCATION_PRIVATE_LOCAL, CAUSE_NOCHANNEL, LOCATION_PRIVATE_LOCAL, CAUSE_NORMAL); /* RELEASE_TYPE, call, port */
e_rule = e_ruleset->rule_first;
e_action = NULL;
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) password timeout %s\n", ea_endpoint->ep_serial, e_extdialing);
- printlog("%3d endpoint PASSWORD timeout\n", ea_endpoint->ep_serial);
+ trace_header("PASSWORD timeout", DIRECTION_NONE);
+ end_trace();
e_connectedmode = 0;
e_dtmf = 0;
new_state(EPOINT_STATE_OUT_DISCONNECT);
notify_active();
e_tx_state = NOTIFY_STATE_ACTIVE;
- printlog("%3d endpoint HOOKFLASH\n", ea_endpoint->ep_serial);
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) dtmf hookflash detected.\n", ea_endpoint->ep_serial);
+ trace_header("HOOKFLASH DTMF", DIRECTION_NONE);
+ end_trace();
if (ea_endpoint->ep_use > 1)
{
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot hooflash while child process is running.\n", ea_endpoint->ep_serial);
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) incoming call is extension\n", ea_endpoint->ep_serial);
/* port makes call from extension */
SCPY(e_callerinfo.intern, e_callerinfo.id);
- SCPY(e_terminal, e_callerinfo.intern);
- SCPY(e_terminal_interface, e_callerinfo.interface);
+ SCPY(e_ext.number, e_callerinfo.intern);
+ SCPY(e_extension_interface, e_callerinfo.interface);
} else
{
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) incoming call is external or voip\n", ea_endpoint->ep_serial);
}
- printlog("%3d incoming %s='%s'%s%s%s%s dialing='%s'\n",
- ea_endpoint->ep_serial,
- (e_callerinfo.intern[0])?"SETUP from extension":"SETUP from extern",
- (e_callerinfo.intern[0])?e_callerinfo.intern:e_callerinfo.id,
- (e_callerinfo.present==INFO_PRESENT_RESTRICTED)?" anonymous":"",
- (e_redirinfo.id[0])?"redirected='":"",
- e_redirinfo.id,
- (e_redirinfo.id[0])?"'":"",
- e_dialinginfo.number
- );
+ trace_header("SETUP", DIRECTION_IN);
+ if (e_callerinfo.intern[0])
+ add_trace("extension", NULL, "%s", e_callerinfo.intern);
+ add_trace("caller id", "number", "%s", numberrize_callerinfo(e_callerinfo.id, e_callerinfo.ntype));
+ if (e_callerinfo.present == INFO_PRESENT_RESTRICTED)
+ add_trace("caller id", "present", "restricted");
+ if (e_redirinfo.id[0])
+ {
+ add_trace("redir'ing", "number", "%s", numberrize_callerinfo(e_redirinfo.id, e_redirinfo.ntype));
+ if (e_redirinfo.present == INFO_PRESENT_RESTRICTED)
+ add_trace("redir'ing", "present", "restricted");
+ }
+ if (e_dialinginfo.number)
+ add_trace("dialing", "number", "%s", e_dialinginfo.number));
+ end_trace();
if (e_callerinfo.itype == INFO_ITYPE_INTERN)
{
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) call from extension '%s'\n", ea_endpoint->ep_serial, e_terminal);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) call from extension '%s'\n", ea_endpoint->ep_serial, e_ext.number);
/* get extension's info about caller */
- if (!read_extension(&e_ext, e_terminal))
+ if (!read_extension(&e_ext, e_ext.number))
{
/* extension doesn't exist */
- printlog("%3d endpoint EXTENSION '%s' doesn't exist, please check or create.\n", ea_endpoint->ep_serial, e_callerinfo.id);
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) rejecting call from not existing extension: '%s'\n", ea_endpoint->ep_serial, e_terminal);
+ trace_header("EXTENSION (not created)", DIRECTION_IN);
+ add_trace("extension", NULL, "%s", e_ext.number);
+ end_trace();
message_disconnect_port(portlist, CAUSE_REJECTED, LOCATION_PRIVATE_LOCAL, "");
new_state(EPOINT_STATE_OUT_DISCONNECT);
set_tone(portlist, "cause_80"); /* pbx cause: extension not authorized */
- e_terminal[0] = '\0'; /* no terminal */
+ e_ext.number[0] = '\0'; /* no terminal */
return;
}
writeext = 0;
/* extension is written */
if (writeext)
- write_extension(&e_ext, e_terminal);
+ write_extension(&e_ext, e_ext.number);
/* set volume of rx and tx */
if (param->setup.callerinfo.itype == INFO_ITYPE_INTERN)
if (e_ext.record!=CODEC_OFF && (e_capainfo.bearer_capa==INFO_BC_SPEECH || e_capainfo.bearer_capa==INFO_BC_AUDIO))
{
/* check if we are a terminal */
- if (e_terminal[0] == '\0')
+ if (e_ext.number[0] == '\0')
PERROR("Port(%d) cannot record because we are not a terminal\n", ea_endpoint->ep_serial);
else
{
port = find_port_id(portlist->port_id);
if (port)
- port->open_record(e_ext.record, 0, 0, e_terminal, e_ext.anon_ignore, "", 0);
+ port->open_record(e_ext.record, 0, 0, e_ext.number, e_ext.anon_ignore, "", 0);
}
}
} else
{
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) call from external port\n", ea_endpoint->ep_serial);
/* no terminal identification */
- e_terminal[0] = '\0';
- e_terminal_interface[0] = '\0';
+ e_ext.number[0] = '\0';
+ e_extension_interface[0] = '\0';
memset(&e_ext, 0, sizeof(e_ext));
e_ext.rights = 4; /* right to dial internat */
}
set_tone(portlist, "dialing");
} else
{
- if (e_terminal[0])
+ if (e_ext.number[0])
set_tone(portlist, "dialpbx");
else
set_tone(portlist, "dialtone");
/* port MESSAGE_INFORMATION */
void EndpointAppPBX::port_information(struct port_list *portlist, int message_type, union parameter *param)
{
- printlog("%3d incoming INFORMATION information='%s'\n",
- ea_endpoint->ep_serial,
- param->information.number
- );
+ trace_header("INFORMATION", DIRECTION_IN);
+ add_trace("dialing", NULL, "%s", param->information.number);
+ if (param->information.sending_complete)
+ add_trace("complete", NULL, NULL);
+ end_trace();
e_overlap = 1;
/* turn off dtmf detection, in case dtmf is sent with keypad information */
if (e_dtmf)
{
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) received dialing information, so dtmf is now disabled, to prevent double detection by keypad+dtmf.\n", ea_endpoint->ep_serial, param->information.number, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) received dialing information, so dtmf is now disabled, to prevent double detection by keypad+dtmf.\n", ea_endpoint->ep_serial, param->information.number, e_ext.number, e_callerinfo.id);
e_dtmf = 0;
}
/* port MESSAGE_DTMF */
void EndpointAppPBX::port_dtmf(struct port_list *portlist, int message_type, union parameter *param)
{
- printlog("%3d incoming DTMF digit='%c'\n",
- ea_endpoint->ep_serial,
- param->dtmf
- );
+ trace_header("DTMF", DIRECTION_IN);
+ add_trace("digit", NULL, "%c", param->dtmf);
+ end_trace();
/* only if dtmf detection is enabled */
if (!e_dtmf)
{
/* signal to call tool */
admin_call_response(e_adminid, ADMIN_CALL_SETUP_ACK, "", 0, 0, 0);
- printlog("%3d incoming SETUP ACKNOWLEDGE\n",
- ea_endpoint->ep_serial
- );
+ trace_header("SETUP ACKNOWLEDGE", DIRECTION_IN);
+ end_trace();
if (e_dialing_queue[0] && portlist)
{
/* send what we have not dialed yet, because we had no setup complete */
/* signal to call tool */
admin_call_response(e_adminid, ADMIN_CALL_PROCEEDING, "", 0, 0, 0);
- printlog("%3d incoming PROCEEDING\n",
- ea_endpoint->ep_serial
- );
+ trace_header("PROCEEDING", DIRECTION_IN);
+ end_trace();
e_state = EPOINT_STATE_OUT_PROCEEDING;
/* check if pattern is availatle */
if (!ea_endpoint->ep_portlist->next && (portlist->earlyb || portlist->port_type==PORT_TYPE_VBOX_OUT)) /* one port_list relation and tones available */
/* signal to call tool */
admin_call_response(e_adminid, ADMIN_CALL_ALERTING, "", 0, 0, 0);
- printlog("%3d incoming ALERTING\n",
- ea_endpoint->ep_serial
- );
+ trace_header("ALERTING", DIRECTION_IN);
+ end_trace();
new_state(EPOINT_STATE_OUT_ALERTING);
/* check if pattern is available */
if (!ea_endpoint->ep_portlist->next && (portlist->earlyb || portlist->port_type==PORT_TYPE_VBOX_OUT)) /* one port_list relation and tones available */
admin_call_response(e_adminid, ADMIN_CALL_CONNECT, numberrize_callerinfo(param->connectinfo.id,param->connectinfo.ntype), 0, 0, 0);
memcpy(&e_connectinfo, ¶m->connectinfo, sizeof(e_connectinfo));
- printlog("%3d incoming CONNECT id='%s'%s\n",
- ea_endpoint->ep_serial,
- (e_connectinfo.intern[0])?e_connectinfo.intern:e_connectinfo.id,
- (e_connectinfo.present==INFO_PRESENT_RESTRICTED)?" anonymous":""
- );
+ trace_header("CONNECT", DIRECTION_IN);
+ if (e_connectinfo.intern[0])
+ add_trace("extension", NULL, "%s", e_connectinfo.intern);
+ add_trace("connect id", "number", "%s", numberrize_callerinfo(e_connectinfo.id, e_connectinfo.ntype));
+ if (e_connectinfo.present == INFO_PRESENT_RESTRICTED)
+ add_trace("connect id", "present", "restricted");
+ end_trace();
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) removing all other ports (start)\n", ea_endpoint->ep_serial);
while(ea_endpoint->ep_portlist->next) /* as long as we have at least two ports */
{
SCPY(e_connectinfo.name, e_ext.name);
/* add internal id to colp */
- SCPY(e_connectinfo.intern, e_terminal);
+ SCPY(e_connectinfo.intern, e_ext.number);
/* we store the connected port number */
- SCPY(e_terminal_interface, e_connectinfo.interfaces);
+ SCPY(e_extension_interface, e_connectinfo.interfaces);
/* for internal and am calls, we get the extension's id */
if (portlist->port_type==PORT_TYPE_VBOX_OUT || e_ext.colp==COLP_HIDE)
{
SCPY(e_connectinfo.id, e_ext.callerid);
- SCPY(e_connectinfo.intern, e_terminal);
+ SCPY(e_connectinfo.intern, e_ext.number);
e_connectinfo.itype = INFO_ITYPE_INTERN;
e_connectinfo.ntype = e_ext.callerid_type;
e_connectinfo.present = e_ext.callerid_present;
}
e_cfnr_call = e_cfnr_release = 0;
- if (e_terminal[0])
+ if (e_ext.number[0])
e_dtmf = 1; /* allow dtmf */
// if (call_countrelations(ea_endpoint->ep_call_id) == 2)
{
{
/* callback */
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) we have a callback, so we create a call with cbcaller: \"%s\".\n", ea_endpoint->ep_serial, e_cbcaller);
- SCPY(e_terminal, e_cbcaller);
+ SCPY(e_ext.number, e_cbcaller);
new_state(EPOINT_STATE_IN_OVERLAP);
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) callback from extension '%s'\n", ea_endpoint->ep_serial, e_terminal);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) callback from extension '%s'\n", ea_endpoint->ep_serial, e_ext.number);
/* get extension's info about terminal */
- if (!read_extension(&e_ext, e_terminal))
+ if (!read_extension(&e_ext, e_ext.number))
{
/* extension doesn't exist */
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) rejecting callback from not existing extension: '%s'\n", ea_endpoint->ep_serial, e_terminal);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) rejecting callback from not existing extension: '%s'\n", ea_endpoint->ep_serial, e_ext.number);
message_disconnect_port(portlist, CAUSE_REJECTED, LOCATION_PRIVATE_LOCAL, "");
new_state(EPOINT_STATE_OUT_DISCONNECT);
set_tone(portlist, "cause_80"); /* pbx cause: extension not authorized */
/* use caller id (or if exist: id_next_call) for this call */
e_callerinfo.screen = INFO_SCREEN_NETWORK;
- SCPY(e_callerinfo.intern, e_terminal);
+ SCPY(e_callerinfo.intern, e_ext.number);
if (e_ext.id_next_call_present >= 0)
{
SCPY(e_callerinfo.id, e_ext.id_next_call);
e_callerinfo.ntype = e_ext.id_next_call_type;
e_ext.id_next_call_present = -1;
/* extension is written */
- write_extension(&e_ext, e_terminal);
+ write_extension(&e_ext, e_ext.number);
} else
{
SCPY(e_callerinfo.id, e_ext.callerid);
e_dtmf = 1;
/* check if caller id is NOT authenticated */
- if (!parse_callbackauth(e_terminal, &e_callbackinfo))
+ if (!parse_callbackauth(e_ext.number, &e_callbackinfo))
{
/* make call state to enter password */
new_state(EPOINT_STATE_IN_OVERLAP);
}
/* start recording if enabled, not when answering machine answers */
- if (param->connectinfo.itype!=INFO_ITYPE_VBOX && e_terminal[0] && e_ext.record!=CODEC_OFF && (e_capainfo.bearer_capa==INFO_BC_SPEECH || e_capainfo.bearer_capa==INFO_BC_AUDIO))
+ if (param->connectinfo.itype!=INFO_ITYPE_VBOX && e_ext.number[0] && e_ext.record!=CODEC_OFF && (e_capainfo.bearer_capa==INFO_BC_SPEECH || e_capainfo.bearer_capa==INFO_BC_AUDIO))
{
/* check if we are a terminal */
- if (e_terminal[0] == '\0')
+ if (e_ext.number[0] == '\0')
PERROR("Port(%d) cannot record because we are not a terminal\n", ea_endpoint->ep_serial);
else
{
port = find_port_id(portlist->port_id);
if (port)
- port->open_record(e_ext.record, 0, 0, e_terminal, e_ext.anon_ignore, "", 0);
+ port->open_record(e_ext.record, 0, 0, e_ext.number, e_ext.anon_ignore, "", 0);
}
}
}
/* signal to call tool */
admin_call_response(e_adminid, (message_type==MESSAGE_DISCONNECT)?ADMIN_CALL_DISCONNECT:ADMIN_CALL_RELEASE, "", param->disconnectinfo.cause, param->disconnectinfo.location, 0);
- printlog("%3d incoming %s cause='%d' (%s) location='%d' (%s)\n",
- ea_endpoint->ep_serial,
- (message_type==MESSAGE_DISCONNECT)?"DISCONNECT":"RELEASE",
- param->disconnectinfo.cause,
- (param->disconnectinfo.cause>0 && param->disconnectinfo.cause<128)?isdn_cause[param->disconnectinfo.cause].english:"-",
- param->disconnectinfo.location,
- (param->disconnectinfo.location>=0 && param->disconnectinfo.location<16)?isdn_location[param->disconnectinfo.location].english:"-"
- );
+ trace_header((message_type==MESSAGE_DISCONNECT)?"DISCONNECT":"RELEASE", DIRECTION_IN);
+ add_trace("cause", "value", "%d", param->disconnectinfo.cause);
+ add_trace("cause", "location", "%d", param->disconnectinfo.location);
+ end_trace();
//#warning does this work? only disconnect when incoming port hat not already disconnected yet?
if (e_state==EPOINT_STATE_IN_DISCONNECT && message_type!=MESSAGE_RELEASE)// || e_state==EPOINT_STATE_OUT_DISCONNECT || e_state==EPOINT_STATE_IDLE)
{
char cause[16];
- printlog("%3d incoming TIMEOUT\n",
- ea_endpoint->ep_serial
- );
+ trace_header("TIMEOUT", DIRECTION_IN);
message_type = MESSAGE_DISCONNECT;
switch (param->state)
{
case PORT_STATE_OUT_SETUP:
case PORT_STATE_OUT_OVERLAP:
+ add_trace("state", NULL, "outgoing setup/dialing");
+ end_trace();
/* no user responding */
release(RELEASE_ALL, LOCATION_PRIVATE_LOCAL, CAUSE_NOUSER, LOCATION_PRIVATE_LOCAL, CAUSE_NORMAL);
return; /* must exit here */
case PORT_STATE_IN_SETUP:
case PORT_STATE_IN_OVERLAP:
+ add_trace("state", NULL, "incoming setup/dialing");
param->disconnectinfo.cause = CAUSE_INVALID; /* number incomplete */
param->disconnectinfo.location = LOCATION_PRIVATE_LOCAL;
break;
case PORT_STATE_OUT_PROCEEDING:
+ add_trace("state", NULL, "outgoing proceeding");
+ end_trace();
param->disconnectinfo.cause = CAUSE_NOUSER; /* no user responding */
param->disconnectinfo.location = LOCATION_PRIVATE_LOCAL;
release(RELEASE_ALL, LOCATION_PRIVATE_LOCAL, CAUSE_NOUSER, LOCATION_PRIVATE_LOCAL, CAUSE_NORMAL);
return; /* must exit here */
case PORT_STATE_IN_PROCEEDING:
+ add_trace("state", NULL, "incoming proceeding");
param->disconnectinfo.cause = CAUSE_NOUSER;
param->disconnectinfo.location = LOCATION_PRIVATE_LOCAL; /* no user responding */
break;
case PORT_STATE_OUT_ALERTING:
+ add_trace("state", NULL, "outgoing alerting");
+ end_trace();
param->disconnectinfo.cause = CAUSE_NOANSWER; /* no answer */
param->disconnectinfo.location = LOCATION_PRIVATE_LOCAL;
release(RELEASE_ALL, LOCATION_PRIVATE_LOCAL, CAUSE_NOANSWER, LOCATION_PRIVATE_LOCAL, CAUSE_NORMAL);
return; /* must exit here */
case PORT_STATE_IN_ALERTING:
+ add_trace("state", NULL, "incoming alerting");
param->disconnectinfo.cause = CAUSE_NOANSWER;
param->disconnectinfo.location = LOCATION_PRIVATE_LOCAL;
break;
case PORT_STATE_IN_DISCONNECT:
case PORT_STATE_OUT_DISCONNECT:
+ add_trace("state", NULL, "disconnect");
+ end_trace();
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) in this special case, we release due to disconnect timeout.\n", ea_endpoint->ep_serial);
release(RELEASE_ALL, LOCATION_PRIVATE_LOCAL, CAUSE_NORMAL, LOCATION_PRIVATE_LOCAL, CAUSE_NORMAL);
return; /* must exit here */
param->disconnectinfo.cause = 31; /* normal unspecified */
param->disconnectinfo.location = LOCATION_PRIVATE_LOCAL;
}
+ end_trace();
/* release call, disconnect isdn */
e_call_pattern = 0;
new_state(EPOINT_STATE_OUT_DISCONNECT);
logtext = "CALL_IS_DIVERTING";
break;
default:
- SPRINT(buffer, "indicator=%d", param->notifyinfo.notify - 0x80);
+ SPRINT(buffer, "%d", param->notifyinfo.notify - 0x80);
logtext = buffer;
}
- printlog("%3d incoming NOTIFY notify='%s' id='%s'%s\n",
- ea_endpoint->ep_serial,
- logtext,
- param->notifyinfo.id,
- (param->notifyinfo.present==INFO_PRESENT_RESTRICTED)?" anonymous":""
- );
+ trace_header("NOTIFY", DIRECTION_IN);
+ if (param->notifyinfo.notify)
+ add_trace("indicator", NULL, "%s", logtext);
+ if (param->notifyinfo.id)
+ {
+ add_trace("redir'on", "number", "%s", numberrize_callerinfo(param->notifyinfo.id, param->notifyinfo.ntype));
+ if (param->notifyinfo.present == INFO_PRESENT_RESTRICTED)
+ add_trace("redir'on", "present", "restricted");
+ }
+ if (param->notifyinfo.display[0])
+ add_trace("display", NULL, "%s", param->notifyinfo.display);
+ end_trace();
/* notify call if available */
if (ea_endpoint->ep_call_id)
{
struct message *message;
- printlog("%3d incoming FACILITY len='%d'\n",
- ea_endpoint->ep_serial,
- param->facilityinfo.len
- );
+ trace_header("FACILITY", DIRECTION_IN);
+ end_trace();
message = message_create(ea_endpoint->ep_serial, ea_endpoint->ep_call_id, EPOINT_TO_CALL, MESSAGE_FACILITY);
memcpy(&message->param.facilityinfo, ¶m->facilityinfo, sizeof(struct facility_info));
/* NOTE: before supending, the inactive-notification must be done in order to set call mixer */
void EndpointAppPBX::port_suspend(struct port_list *portlist, int message_type, union parameter *param)
{
- printlog("%3d incoming SUSPEND\n",
- ea_endpoint->ep_serial
- );
+ trace_header("SUSPEND", DIRECTION_IN);
+ end_trace();
/* epoint is now parked */
ea_endpoint->ep_park = 1;
memcpy(ea_endpoint->ep_park_callid, param->parkinfo.callid, sizeof(ea_endpoint->ep_park_callid));
/* NOTE: before resume, the active-notification must be done in order to set call mixer */
void EndpointAppPBX::port_resume(struct port_list *portlist, int message_type, union parameter *param)
{
- printlog("%3d incoming RESUME\n",
- ea_endpoint->ep_serial
- );
+ trace_header("RESUME", DIRECTION_IN);
+ end_trace();
/* epoint is now resumed */
ea_endpoint->ep_park = 0;
return;
}
-// PDEBUG(DEBUG_EPOINT, "received message %d (terminal %s, caller id %s)\n", message, e_terminal, e_callerinfo.id);
+// PDEBUG(DEBUG_EPOINT, "received message %d (terminal %s, caller id %s)\n", message, e_ext.number, e_callerinfo.id);
switch(message_type)
{
case MESSAGE_DATA: /* data from port */
/* PORT sends INFORMATION message */
case MESSAGE_INFORMATION: /* additional digits received */
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) incoming call dialing more=%s (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, param->information.number, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) incoming call dialing more=%s (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, param->information.number, e_ext.number, e_callerinfo.id);
port_information(portlist, message_type, param);
break;
/* PORT sends FACILITY message */
case MESSAGE_FACILITY:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) incoming facility (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) incoming facility (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
port_facility(portlist, message_type, param);
break;
/* PORT sends DTMF message */
case MESSAGE_DTMF: /* dtmf digits received */
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) dtmf digit=%c (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, param->dtmf, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) dtmf digit=%c (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, param->dtmf, e_ext.number, e_callerinfo.id);
port_dtmf(portlist, message_type, param);
break;
/* PORT sends MORE message */
case MESSAGE_OVERLAP:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) outgoing call is accepted [overlap dialing] (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) outgoing call is accepted [overlap dialing] (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
if (e_state != EPOINT_STATE_OUT_SETUP)
{
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) ignored because we are not in setup state (for port_list: another portlist might have changed the state already).\n", ea_endpoint->ep_serial);
/* PORT sends PROCEEDING message */
case MESSAGE_PROCEEDING: /* port is proceeding */
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) outgoing call is proceeding (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) outgoing call is proceeding (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
if (e_state!=EPOINT_STATE_OUT_SETUP
&& e_state!=EPOINT_STATE_OUT_OVERLAP)
{
/* PORT sends ALERTING message */
case MESSAGE_ALERTING:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) outgoing call is ringing (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) outgoing call is ringing (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
if (e_state!=EPOINT_STATE_OUT_SETUP
&& e_state!=EPOINT_STATE_OUT_OVERLAP
&& e_state!=EPOINT_STATE_OUT_PROCEEDING)
/* PORT sends CONNECT message */
case MESSAGE_CONNECT:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) outgoing call connected to %s (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, e_connectinfo.id, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) outgoing call connected to %s (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, e_connectinfo.id, e_ext.number, e_callerinfo.id);
if (e_state!=EPOINT_STATE_OUT_SETUP
&& e_state!=EPOINT_STATE_OUT_OVERLAP
&& e_state!=EPOINT_STATE_OUT_PROCEEDING
/* PORT sends DISCONNECT message */
case MESSAGE_DISCONNECT: /* port is disconnected */
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) call disconnect with cause=%d location=%d (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, param->disconnectinfo.cause, param->disconnectinfo.location, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) call disconnect with cause=%d location=%d (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, param->disconnectinfo.cause, param->disconnectinfo.location, e_ext.number, e_callerinfo.id);
port_disconnect_release(portlist, message_type, param);
break;
/* PORT sends a RELEASE message */
case MESSAGE_RELEASE: /* port releases */
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) release with cause=%d location=%d (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, param->disconnectinfo.cause, param->disconnectinfo.location, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) release with cause=%d location=%d (terminal '%s', caller id '%s')\n", ea_endpoint->ep_serial, param->disconnectinfo.cause, param->disconnectinfo.location, e_ext.number, e_callerinfo.id);
/* portlist is release at port_disconnect_release, thanx Paul */
port_disconnect_release(portlist, message_type, param);
break;
/* PORT sends a TIMEOUT message */
case MESSAGE_TIMEOUT:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received timeout (state=%d).\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id, param->state);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received timeout (state=%d).\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id, param->state);
port_timeout(portlist, message_type, param);
break; /* release */
/* PORT sends a NOTIFY message */
case MESSAGE_NOTIFY:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received notify.\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received notify.\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
port_notify(portlist, message_type, param);
break;
/* PORT sends a SUSPEND message */
case MESSAGE_SUSPEND:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received suspend.\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received suspend.\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
port_suspend(portlist, message_type, param);
break; /* suspend */
/* PORT sends a RESUME message */
case MESSAGE_RESUME:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received resume.\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received resume.\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
port_resume(portlist, message_type, param);
break;
default:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received a wrong message: %d\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id, message);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received a wrong message: %d\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id, message);
}
/* Note: this endpoint may be destroyed, so we MUST return */
break;
default:
- PERROR("EPOINT(%d) epoint with terminal '%s' (caller id '%s') unknown crypt message: '%d'\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id, param->crypt.type);
+ PERROR("EPOINT(%d) epoint with terminal '%s' (caller id '%s') unknown crypt message: '%d'\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id, param->crypt.type);
}
}
set_tone(portlist, "dialtone");
return;
}
- if (e_terminal[0])
+ if (e_ext.number[0])
set_tone(portlist, "dialpbx");
else
set_tone(portlist, "dialtone");
set_tone(portlist, "ringing");
return;
}
- if (e_terminal[0])
+ if (e_ext.number[0])
set_tone(portlist, "ringpbx");
else
set_tone(portlist, "ringing");
new_state(EPOINT_STATE_CONNECT);
// UCPY(e_call_tone, "");
- if (e_terminal[0])
+ if (e_ext.number[0])
e_dtmf = 1; /* allow dtmf */
e_powerdialing = 0;
memcpy(&e_connectinfo, ¶m->connectinfo, sizeof(e_callerinfo));
memcpy(&message->param.connnectinfo, e_connectinfo);
/* screen clip if prefix is required */
- if (e_terminal[0] && message->param.connectinfo.id[0] && e_ext.clip_prefix[0])
+ if (e_ext.number[0] && message->param.connectinfo.id[0] && e_ext.clip_prefix[0])
{
SCPY(message->param.connectinfo.id, e_ext.clip_prefix);
SCAT(message->param.connectinfo.id, numberrize_callerinfo(e_connectinfo.id,e_connectinfo.ntype));
}
/* use internal caller id */
- if (e_terminal[0] && e_connectinfo.intern[0] && (message->param.connectinfo.present!=INFO_PRESENT_RESTRICTED || e_ext.anon_ignore))
+ if (e_ext.number[0] && e_connectinfo.intern[0] && (message->param.connectinfo.present!=INFO_PRESENT_RESTRICTED || e_ext.anon_ignore))
{
SCPY(message->param.connectinfo.id, e_connectinfo.intern);
message->param.connectinfo.ntype = INFO_NTYPE_UNKNOWN;
e_call_pattern = 0;
}
set_tone(ea_endpoint->ep_portlist, "redial");
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') redialing in %d seconds\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id, (int)e_powerdelay);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') redialing in %d seconds\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id, (int)e_powerdelay);
/* send proceeding when powerdialing and still setup (avoid dialing timeout) */
if (e_state==EPOINT_STATE_IN_OVERLAP)
{
}
/* if an internal extension is dialed, copy that number */
if (param->setup.dialinginfo.itype==INFO_ITYPE_INTERN || param->setup.dialinginfo.itype==INFO_ITYPE_VBOX)
- SCPY(e_terminal, param->setup.dialinginfo.number);
+ SCPY(e_ext.number, param->setup.dialinginfo.number);
/* if an internal extension is dialed, get extension's info about caller */
- if (e_terminal[0])
+ if (e_ext.number[0])
{
- if (!read_extension(&e_ext, e_terminal))
+ if (!read_extension(&e_ext, e_ext.number))
{
- e_terminal[0] = '\0';
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) the called terminal='%s' is not found in directory tree!\n", ea_endpoint->ep_serial, e_terminal);
+ e_ext.number[0] = '\0';
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) the called terminal='%s' is not found in directory tree!\n", ea_endpoint->ep_serial, e_ext.number);
}
}
/* process (voice over) data calls */
if (e_ext.datacall && e_capainfo.bearer_capa!=INFO_BC_SPEECH && e_capainfo.bearer_capa!=INFO_BC_AUDIO)
{
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) handling data call as audio call: '%s'\n", ea_endpoint->ep_serial, e_terminal);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) handling data call as audio call: '%s'\n", ea_endpoint->ep_serial, e_ext.number);
memset(&e_capainfo, 0, sizeof(e_capainfo));
e_capainfo.bearer_capa = INFO_BC_AUDIO;
e_capainfo.bearer_mode = INFO_BMODE_CIRCUIT;
}
}
-// PDEBUG(DEBUG_EPOINT, "EPOINT(%d) received message %d for active call (terminal %s, caller id %s state=%d)\n", ea_endpoint->ep_serial, message, e_terminal, e_callerinfo.id, e_state);
+// PDEBUG(DEBUG_EPOINT, "EPOINT(%d) received message %d for active call (terminal %s, caller id %s state=%d)\n", ea_endpoint->ep_serial, message, e_ext.number, e_callerinfo.id, e_state);
switch(message_type)
{
/* CALL SENDS CRYPT message */
case MESSAGE_CRYPT:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received crypt message: '%d'\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id, param->crypt.type);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received crypt message: '%d'\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id, param->crypt.type);
call_crypt(portlist, message_type, param);
break;
/* CALL sends INFORMATION message */
case MESSAGE_INFORMATION:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received more digits: '%s'\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id, param->information.number);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received more digits: '%s'\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id, param->information.number);
call_information(portlist, message_type, param);
break;
/* CALL sends FACILITY message */
case MESSAGE_FACILITY:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received facility\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received facility\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
call_facility(portlist, message_type, param);
break;
/* CALL sends OVERLAP message */
case MESSAGE_OVERLAP:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received 'more info available'\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received 'more info available'\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
if (e_state!=EPOINT_STATE_IN_SETUP
&& e_state!=EPOINT_STATE_IN_OVERLAP)
{
/* CALL sends PROCEEDING message */
case MESSAGE_PROCEEDING:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s (caller id '%s') received proceeding\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s (caller id '%s') received proceeding\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
if(e_state!=EPOINT_STATE_IN_OVERLAP)
{
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) ignored because we are not in setup state.\n", ea_endpoint->ep_serial);
/* CALL sends ALERTING message */
case MESSAGE_ALERTING:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received alerting\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received alerting\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
if (e_state!=EPOINT_STATE_IN_OVERLAP
&& e_state!=EPOINT_STATE_IN_PROCEEDING)
{
/* CALL sends CONNECT message */
case MESSAGE_CONNECT:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received connect\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received connect\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
if (e_state!=EPOINT_STATE_IN_OVERLAP
&& e_state!=EPOINT_STATE_IN_PROCEEDING
&& e_state!=EPOINT_STATE_IN_ALERTING)
/* CALL sends DISCONNECT/RELEASE message */
case MESSAGE_DISCONNECT: /* call disconnect */
case MESSAGE_RELEASE: /* call releases */
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received %s with cause %d location %d\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id, (message_type==MESSAGE_DISCONNECT)?"disconnect":"release", param->disconnectinfo.cause, param->disconnectinfo.location);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received %s with cause %d location %d\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id, (message_type==MESSAGE_DISCONNECT)?"disconnect":"release", param->disconnectinfo.cause, param->disconnectinfo.location);
call_disconnect_release(portlist, message_type, param);
break;
/* CALL sends special mISDNSIGNAL message */
case MESSAGE_mISDNSIGNAL: /* isdn message to port */
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received mISDNsignal message.\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received mISDNsignal message.\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
call_mISDNsignal(portlist, message_type, param);
break;
/* CALL has pattern available */
case MESSAGE_PATTERN: /* indicating pattern available */
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received pattern availability.\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received pattern availability.\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
if (!e_call_pattern)
{
PDEBUG(DEBUG_EPOINT, "-> pattern becomes available\n");
/* CALL has no pattern available */
case MESSAGE_NOPATTERN: /* indicating no pattern available */
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received pattern NOT available.\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received pattern NOT available.\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
if (e_call_pattern)
{
PDEBUG(DEBUG_EPOINT, "-> pattern becomes unavailable\n");
#if 0
/* CALL (dunno at the moment) */
case MESSAGE_REMOTE_AUDIO:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received audio remote request.\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received audio remote request.\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
message = message_create(ea_endpoint->ep_serial, ea_endpoint->ep_call_id, EPOINT_TO_CALL, MESSAGE_CHANNEL);
message->param.channel = param->channel;
message_put(message);
/* CALL sends a notify message */
case MESSAGE_NOTIFY:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received notify.\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received notify.\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id);
call_notify(portlist, message_type, param);
break;
default:
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received a wrong message: #%d\n", ea_endpoint->ep_serial, e_terminal, e_callerinfo.id, message);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) epoint with terminal '%s' (caller id '%s') received a wrong message: #%d\n", ea_endpoint->ep_serial, e_ext.number, e_callerinfo.id, message);
}
}
{
if (port->p_type == PORT_TYPE_VBOX_OUT)
{
- if (match_list(extensions, eapp->e_terminal))
+ if (match_list(extensions, eapp->e_ext.number))
{
found = eapp;
vbox = 1;
}
if ((port->p_type==PORT_TYPE_DSS1_NT_OUT || port->p_type==PORT_TYPE_DSS1_TE_OUT)
&& port->p_state==PORT_STATE_OUT_ALERTING)
- if (match_list(extensions, eapp->e_terminal))
+ if (match_list(extensions, eapp->e_ext.number))
{
found = eapp;
}
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: we have no port.\n", ea_endpoint->ep_serial);
return;
}
- if (!e_terminal[0])
+ if (!e_ext.number[0])
{
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: we are not internal extension.\n", ea_endpoint->ep_serial);
return;
other_eapp = other_eapp->next;
continue;
}
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) comparing other endpoint candiate: (ep%d) terminal='%s' port=%s call=%d.\n", ea_endpoint->ep_serial, other_eapp->ea_endpoint->ep_serial, other_eapp->e_terminal, (other_eapp->ea_endpoint->ep_portlist)?"YES":"NO", other_eapp->ea_endpoint->ep_call_id);
- if (other_eapp->e_terminal[0] /* has terminal */
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) comparing other endpoint candiate: (ep%d) terminal='%s' port=%s call=%d.\n", ea_endpoint->ep_serial, other_eapp->ea_endpoint->ep_serial, other_eapp->e_ext.number, (other_eapp->ea_endpoint->ep_portlist)?"YES":"NO", other_eapp->ea_endpoint->ep_call_id);
+ if (other_eapp->e_ext.number[0] /* has terminal */
&& other_eapp->ea_endpoint->ep_portlist /* has port */
&& other_eapp->ea_endpoint->ep_call_id) /* has call */
{
*errstr = "No Call";
return(1);
}
- if (!e_terminal[0])
+ if (!e_ext.number[0])
{
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) error: we are not internal extension.\n", ea_endpoint->ep_serial);
*errstr = "No Call";
switch(message->type)
{
case MESSAGE_SETUP:
- port = find_port_id(message->id_to);
- if (!port)
- return;
- if (port->p_type == PORT_TYPE_DSS1_NT_OUT)
- {
- pdss1 = (class Pdss1 *)port;
- printlog("%3d outgoing SETUP from %s='%s'%s%s%s%s to intern='%s' port='%d' (NT)\n",
- ea_endpoint->ep_serial,
- (message->param.setup.callerinfo.intern[0])?"intern":"extern",
- (message->param.setup.callerinfo.intern[0])?e_callerinfo.intern:e_callerinfo.id,
- (message->param.setup.callerinfo.present==INFO_PRESENT_RESTRICTED)?" anonymous":"",
- (message->param.setup.redirinfo.id[0])?"redirected='":"",
- message->param.setup.redirinfo.id,
- (message->param.setup.redirinfo.id[0])?"'":"",
- message->param.setup.dialinginfo.number,
- pdss1->p_m_mISDNport->portnum
- );
- }
- if (port->p_type == PORT_TYPE_DSS1_TE_OUT)
+ trace_header("SETUP", DIRECTION_OUT);
+ if (message->param.setup.callerinfo.intern[0])
+ add_trace("extension", NULL, "%s", message->param.setup.callerinfo.intern);
+ add_trace("caller id", "number", "%s", numberrize_callerinfo(message->param.setup.callerinfo.id, message->param.setup.callerinfo.ntype));
+ if (message->param.setup.callerinfo.present == INFO_PRESENT_RESTRICTED)
+ add_trace("caller id", "present", "restricted");
+ if (message->param.setup.redirinfo.number[0])
{
- pdss1 = (class Pdss1 *)port;
- printlog("%3d outgoing SETUP from %s='%s'%s%s%s%s to extern='%s' port='%d' (TE)\n",
- ea_endpoint->ep_serial,
- (message->param.setup.callerinfo.intern[0])?"intern":"extern",
- (message->param.setup.callerinfo.intern[0])?e_callerinfo.intern:e_callerinfo.id,
- (message->param.setup.callerinfo.present==INFO_PRESENT_RESTRICTED)?" anonymous":"",
- (message->param.setup.redirinfo.id[0])?"redirected='":"",
- message->param.setup.redirinfo.id,
- (message->param.setup.redirinfo.id[0])?"'":"",
- message->param.setup.dialinginfo.number,
- pdss1->p_m_mISDNport->portnum
- );
- }
- if (port->p_type == PORT_TYPE_VBOX_OUT)
- {
- printlog("%3d outgoing SETUP from %s='%s'%s%s%s%s to vbox='%s'\n",
- ea_endpoint->ep_serial,
- (message->param.setup.callerinfo.intern[0])?"intern":"extern",
- (message->param.setup.callerinfo.intern[0])?e_callerinfo.intern:e_callerinfo.id,
- (message->param.setup.callerinfo.present==INFO_PRESENT_RESTRICTED)?" anonymous":"",
- (message->param.setup.redirinfo.id[0])?"redirected='":"",
- message->param.setup.redirinfo.id,
- (message->param.setup.redirinfo.id[0])?"'":"",
- message->param.setup.dialinginfo.number
- );
+ add_trace("redir'ing", "number", "%s", numberrize_callerinfo(message->param.setup.redirinfo.id, message->param.setup.redirinfo.ntype));
+ if (message->param.setup.redirinfo.present == INFO_PRESENT_RESTRICTED)
+ add_trace("redir'ing", "present", "restricted");
}
+ if (message->param.setup.dialinginfo.number[0])
+ add_trace("dialing", NULL, "%s", message->param.setup.dialinginfo.number);
+ end_trace();
break;
case MESSAGE_OVERLAP:
- printlog("%3d outgoing SETUP ACKNOWLEDGE\n",
- ea_endpoint->ep_serial
- );
+ trace_header("SETUP ACKNOWLEDGE", DIRECTION_OUT);
+ end_trace();
break;
case MESSAGE_PROCEEDING:
- printlog("%3d outgoing PROCEEDING\n",
- ea_endpoint->ep_serial
- );
+ trace_header("PROCEEDING", DIRECTION_OUT);
+ end_trace();
break;
case MESSAGE_ALERTING:
- printlog("%3d outgoing ALERTING\n",
- ea_endpoint->ep_serial
- );
+ trace_header("ALERTING", DIRECTION_OUT);
+ end_trace();
break;
case MESSAGE_CONNECT:
- printlog("%3d outgoing CONNECT id='%s'%s\n",
- ea_endpoint->ep_serial,
- message->param.connectinfo.id,
- (message->param.connectinfo.present==INFO_PRESENT_RESTRICTED)?" anonymous":""
- );
+ trace_header("CONNECT", DIRECTION_OUT);
+ if (message->param.connectinfo.intern[0])
+ add_trace("extension", NULL, "%s", message->param.connectinfo.intern);
+ add_trace("connect id", "number", "%s", numberrize_callerinfo(message->param.connectinfo.id, message->param.connectinfo.ntype));
+ if (message->param.connectinfo.present == INFO_PRESENT_RESTRICTED)
+ add_trace("connect id", "present", "restricted");
+ end_trace();
break;
case MESSAGE_DISCONNECT:
- printlog("%3d outgoing DISCONNECT cause='%d' (%s) location='%d' (%s) display='%s'\n",
- ea_endpoint->ep_serial,
- message->param.disconnectinfo.cause,
- (message->param.disconnectinfo.cause>0 && message->param.disconnectinfo.cause<128)?isdn_cause[message->param.disconnectinfo.cause].english:"-",
- message->param.disconnectinfo.location,
- (message->param.disconnectinfo.location>=0 && message->param.disconnectinfo.location<16)?isdn_location[message->param.disconnectinfo.location].english:"-",
- message->param.disconnectinfo.display
- );
+ trace_header("DISCONNECT", DIRECTION_OUT);
+ add_trace("cause", "value", "%d", message->param.disconnectinfo.cause);
+ add_trace("cause", "location", "%d", message->param.disconnectinfo.location);
+ end_trace();
break;
case MESSAGE_RELEASE:
- printlog("%3d outgoing RELEASE cause='%d' (%s) location='%d' (%s)\n",
- ea_endpoint->ep_serial,
- message->param.disconnectinfo.cause,
- (message->param.disconnectinfo.cause>0 && message->param.disconnectinfo.cause<128)?isdn_cause[message->param.disconnectinfo.cause].english:"-",
- message->param.disconnectinfo.location,
- (message->param.disconnectinfo.location>=0 && message->param.disconnectinfo.location<16)?isdn_location[message->param.disconnectinfo.location].english:"-"
- );
+ trace_header("RELEASE", DIRECTION_OUT);
+ add_trace("cause", "value", "%d", message->param.disconnectinfo.cause);
+ add_trace("cause", "location", "%d", message->param.disconnectinfo.location);
+ end_trace();
break;
case MESSAGE_NOTIFY:
logtext = "CALL_IS_DIVERTING";
break;
default:
- SPRINT(buffer, "indicator=%d", message->param.notifyinfo.notify - 0x80);
+ SPRINT(buffer, "%d", message->param.notifyinfo.notify - 0x80);
logtext = buffer;
}
- printlog("%3d outgoing NOTIFY notify='%s' id='%s'%s display='%s'\n",
- ea_endpoint->ep_serial,
- logtext,
- message->param.notifyinfo.id,
- (message->param.notifyinfo.present==INFO_PRESENT_RESTRICTED)?" anonymous":"",
- message->param.notifyinfo.display
- );
+ trace_header("NOTIFY", DIRECTION_OUT);
+ if (message->param.notifyinfo.notify)
+ add_trace("indicator", NULL, "%s", logtext);
+ if (message->param.notifyinfo.number[0])
+ {
+ add_trace("redir'on", "number", "%s", numberrize_callerinfo(message->param.notifyinfo.id, message->param.notifyinfo.ntype));
+ if (message->param.notifyinfo.present == INFO_PRESENT_RESTRICTED)
+ add_trace("redir'on", "present", "restricted");
+ }
+ if (message->param.notifyinfo.display[0])
+ add_trace("display", NULL, "%s", message->param.notifyinfo.display);
+ end_trace();
break;
case MESSAGE_INFORMATION:
- printlog("%3d outgoing INFORMATION information='%s'\n",
- ea_endpoint->ep_serial,
- message->param.information.number
- );
+ trace_header("INFORMATION", DIRECTION_OUT);
+ add_trace("dialing", NULL, "%s", message->param.information.number);
+ end_trace();
break;
case MESSAGE_FACILITY:
- printlog("%3d outgoing FACILITY len='%d'\n",
- ea_endpoint->ep_serial,
- message->param.facilityinfo.len
- );
+ trace_header("FACILITY", DIRECTION_OUT);
+ end_trace();
break;
case MESSAGE_TONE:
- printlog("%3d outgoing TONE dir='%s' name='%s'\n",
- ea_endpoint->ep_serial,
- message->param.tone.dir,
- message->param.tone.name
- );
+ trace_header("TONE", DIRECTION_OUT);
+ if (message->param.tone.name[0])
+ {
+ add_trace("directory", NULL, "%s", message->param.tone.dir[0]?message->param.tone.dir:"default");
+ add_trace("name", NULL, "%s", message->param.tone.name);
+ } else
+ add_trace("off", NULL, NULL);
+ end_trace();
break;
default: