Added GSM network support.

[lcr.git] / default / gsm.conf

diff --git a/default/gsm.conf b/default/gsm.conf
new file mode 100644 (file)
index 0000000..b7d7bac
--- /dev/null
+++ b/default/gsm.conf
@@ -0,0 +1,74 @@
+# LCR GSM options
+#################
+
+# Enable debugging of OpenBSC library.
+# Refer to OpenBSC project for debugging options.
+# By default, debugging is turned off.
+#debug DRLL:DCC:DMM:DRR:DRSL:DNM
+
+# Two Loopback interfaces for audio transfer between OpenBSC and mISDN.
+# The first interface must provide B-channelis for each call mobile call.
+# The seond interface links them to LCR.
+# Use 30 B-channels unless you need more due to many TRXs.
+# -> Load with: "modprobe mISDN_l1loop pri=1 nchannel=30"
+# By default "mISDN_l1loop.1" and "mISDN_l1loop.2" is used.
+#interface-bsc mISDN_l1loop.1
+#interface-lcr mISDN_l1loop.2
+
+# GSM network names.
+# This name is presented to the mobile station.
+# By default 'LCR' is used.
+#long-name Linux-Call-Router
+#short-name LCR
+
+# Give the GSM country code.
+# The country code is different from the PSTN country code. E.g Germany uses
+# 262 instead of 49. Use this for IMSI catching.
+# This will override the default value of 1 = 'test country';
+#mcc 001
+
+# Give the GSM network code.
+# The network code is different from the PSTN network codes. Change this if
+# you run different test networks in the same locations.
+# This will override the default value of 1 = 'test network';
+#mnc 01
+
+# Give the location area code.
+# The location area code is not known to the author of LCR. Don't change it!
+#lac 1
+
+# Give database of Home Location Register (HLR)
+# HLR stores all subscribers. It will be used to grant access to the network.
+# It is an Sqlite3 database. Refer to OpenBSC project for handling.
+# The database is located at /usr/local/lcr by default.
+#hlr hlr.sqlite3
+
+# Authorization of unknown subscribers.
+# To allow all subscribers to access the network, use this option.
+# By default, subscribers are only accepted if allowed in the HLR
+allow-all
+
+# To keep layer 2 connection to BS11 when quitting, use this option.
+# It is only usefull for developing. TRX will stay on.
+# Warning: Keeping layer 2 link may prevent emergency calls. (See below)
+# Layer 2 will only be kept, if lcr was killed manually.
+#keep-l2
+
+# You must define a list of your BTS'.
+# Usage: 'bts bs11 <card> <frequency> [<frequency 2>]
+#  The keyword 'bts' is used to specify a BTS. Multiple BTS' may be defined.
+#  The 'bs11' keyword specifies a BS11 BTS connected to an E1 card.
+#  The frequency is given for the first TRX (tranceiver).
+#  In case of a second tranceiver, give frequency 2.
+bts bs11 9 123
+
+# Shutdown on emergency calls:
+# This option will prevent a shutdown if an emergency call is received. In
+# case of an emergency, a mobile phone may log onto you GSM network and may
+# use it to set up an emergency call.
+# The received emergency call will have 'emergency' as dialed number. But this
+# number can't be dialed on PSTN networks without chaning.
+# If you disable shutdown, be sure to provide routing of emergency calls to
+# emergency facility. If you can't do that, don't touch it!
+#no-emergency-shutdown
+