################
-# Example of an ISDN interface on port 0
+# Example of an ISDN interface on port 0 used for external calls.
#[Ext]
-#external
+#extern
#portnum 0
# Example of a multilink ISDN interface (Anlagenanschluss) on port 2
# and 3
#[Ext]
-#external
+#extern
#portnum 2
#portnum 3
# Layer-2-Hold is required to keep link alive.
#[Ext]
-#external
+#extern
#portnum 0
#ptp
#layer2hold yes
# required.
#[Ext]
-#external
+#extern
#screen-out unknown 300 national 21250993300
-#screen-out unknown 2* national 212509932*
+#screen-out unknown 2% national 212509932%
#tones yes
#portnum 0
# (Siemens EWSD will select bot-way-channels when indicated that way.)
#[Ext]
-#external
+#extern
#portnum 0
#layer2hold
#channel-in 1,2,3,4,5,6,7,8,9,10,22,23,24,25,26,27,28,29,30,31
# Now all information elements can be transmitted in both directions.
#[Ext]
-#external
+#extern
#portnum 0
#te-special
# digits will be dialed after setup via overlap dialing.
#[Ext]
-#external
+#extern
#portnum 0
#dialmax 20
-# Example of an ISDN interface on port 1, with alternate tones_dir to use.
+# Example of an ISDN interface on port 1, with alternate tones-dir to use.
# In this case, the tones are "german" tones generated by mISDN_dsp.ko.
# It is possible to give different sample sets, like "tones_german".
#[Int]
#extension
#msn 201,202,203
-#tones_dir german
+#tones-dir german
#portnum 1
#nt
-# A special case for GSM interface.
-# Don't remove/change the settings, they will cause undefined behaviour
-# of LCR. The actual interface is defined in gsm.conf.
-# You may add 'extension' and 'mns' keywords to turn all your subscribers
+# A special case for GSM Network interface.
+# optionally give "gsm-bs <name of network instance>".
+# You may add 'extension' and 'msn' keywords to turn all your subscribers
# in you GSM network to internal 'extensions'.
# The MSN numbers will equal the subscriber number.
#[GSM]
-#gsm
-#nt
-#layer1hold no
-#layer2hold no
+#gsm-bs
+#hr
+#tones yes
+#earlyb no
+
+
+# A special case for GSM Mobile Station interface.
+# give "gsm-ms <name of mobile instance>".
+# You may add 'extern' to make this interface the external line by default.
+#[GSM]
+#gsm-ms 1
+#tones no
+#earlyb yes
+##extern
+
+
+# Use chan_lcr (Asterisk PBX interface) as external interface.
+#[Ext]
+#remote asterisk
+#exten from-lcr
+#extern
+#earlyb yes
+#tones no
+
+
+# Use chan_lcr (Asterisk PBX interface) as internal interface.
+# The caller ID is used as extension, if "extension" parameter is given.
+# Use "screen-in % xxx" to modify any caller id to xxx.
+# An internal extension does not receive tones ("earlyb"), but sends them.
+#[ast]
+#remote asterisk
+#exten from-lcr
+##note: The following keyword means that this interface is an LCR internal extension
+#extension
+##screen-in % 209
+#earlyb no
#tones yes
+
+
+# Use Sofia-SIP as SIP point-to-point interface
+#[sip]
+#sip <local ip>[:<local port>] <remote ip>[:<remote port>]
+#sip 10.0.0.12 10.0.0.34
#earlyb no
-#channel-in free
-#channel-out any
-#nodtmf
+#tones no
+
+# Use Sofia-SIP as SIP client to register to a SIP gateway/proxy
+#[sip]
+## define source and destination IP to make a call
+#sip 192.168.0.55 sipgate.de
+## define <user> <host> [<options-interval>] to register to a SIP gateway
+#register <user> sipgate.de 300
+##define RTP port range or use default
+#rtp-ports 30000 39999
+## use authentication credentials, use realm to authenticate remote
+#authenticate <user> <password> [<realm>]
+## define keepalive timer to keep INVITE/REGISTER alive
+## this is also required to keep the NAT router's table alive
+#options-interval 15
+## define asserted ID (real caller ID) to use no screening CLIP
+##asserted-id <my real phone number>
+## define public IP (if behind NAT firewall)
+#public 123.45.67.89
+## OR define stun server and resolving interval
+#stun stun.sipgate.net 300
+## screen caller ID to SIP caller ID
+#screen-out % <callerID>
+#tones yes
+#earlyb yes
+
+# Use Sofia-SIP as SIP gateway/proxy to allow SIP clients to register
+#[sip]
+## define source
+#sip 192.168.0.55
+##define RTP port range or use default
+#rtp-ports 30000 39999
+## use authentication credentials and realm to authenticate remote
+#authenticate <user> <password> <realm>
+## define keepalive timer to keep INVITE/REGISTER alive
+## this is also required to keep the NAT router's table alive
+#options-interval 15
+## define public IP (if behind NAT firewall)
+#public 123.45.67.89
+## OR define stun server and resolving interval
+#stun stun.sipgate.net 300
+#tones yes
+#earlyb yes
# Hint: Enter "lcr interface" for quick help on interface options.
[Ext]
-external
+extern
portnum 0
projects / lcr.git / blobdiff