--- /dev/null
+# PBX options
+#############
+
+# Turn debugging all on=0xffff or off=0x0000 (default= 0x0000)
+#define DEBUG_CONFIG 0x0001
+#define DEBUG_MSG 0x0002
+#define DEBUG_STACK 0x0004
+#define DEBUG_BCHANNEL 0x0008
+#define DEBUG_PORT 0x0100
+#define DEBUG_ISDN 0x0110
+#define DEBUG_H323 0x0120
+#define DEBUG_VBOX 0x0180
+#define DEBUG_EPOINT 0x0200
+#define DEBUG_CALL 0x0400
+#define DEBUG_CRYPT 0x1000
+#define DEBUG_ROUTE 0x2000
+#define DEBUG_IDLETIME 0x4000
+#define DEBUG_LOG 0x7fff
+
+#debug 0x0000
+
+# The log file can be used to track actions by the PBX. Omit the parameter
+# to turn off log file. By default, log file is located inside the directory
+# "/usr/local/pbx/log".
+#log /usr/local/pbx/log
+
+# Use "alaw" (default) or "ulaw" samples.
+#alaw
+
+# The pbx should run as real time process. Because audio is streamed and
+# ISDN protocol requires a certain response time, we must have high priority.
+# By default, the process runs with realtime scheduling and high priority.
+# To debug, it is whise to use "schedule" with no parameter to turn off
+# realtime scheduling. In case of an endless loop bug, PBX4Linux will take
+# all CPU time forever - your machine hangs.
+#schedule 0
+
+# Use tone sets (default= tones_american).
+# This can be overridden by the extension setting
+#tones_dir tones_american
+
+# Fetch tone sets as specified here.
+# The tone sets will be loaded during startup, and no harddisk access is
+# required. Specify all tone sets seperated by komma.
+# By default, no tone is fetched. Tone sets, that are not specified here, will
+# be streamed from hard disk.
+# Don't use spaces to seperate!
+#fetch_tones tones_american,tones_german,vbox_english,vbox_german
+
+# Extensions directory where all configuration files and messages for all
+# extensions are stored (default= extensions).
+#extensions_dir extensions
+
+# Prefix to dial national call (default= 0).
+# If you omit the prefix, all subscriber numbers are national numbers.
+# (example: Danmark)
+#national 0
+
+# Prefix to dial international call (default= 00).
+# If you omit the prefix, all subscriber numbers are international numbers.
+#international 00
+
+# On external calls, dialing can be done via normal called party number
+# information element or via keypad facility. Some telephone systems require
+# dialing via keypad to enable/disable special functions.
+# By default keypad facility is disabled.
+#keypad
+
+# Internal/external ports (cards connected to your isdn line)
+# MUST be the card number. Use "./pbx query" to list.
+# Add "ptp" for using internal port as point-to-point. (Only required for NT mode ports.)
+# Example: port 2
+# port 3 ptp
+port 2
+port 3
+
+# Specify the H323 endpoint name. If omitted the hostname is used.
+#h323_name PBX4Linux
+
+# Incoming H323 calls can be connected prior answer, because some clients will
+# not play any inband tones during ringing, they just wait as nothing would
+# happen.
+# This only works for external calls. If a H323 caller is authenticated via
+# h323_gateway.conf, a special "connect" option may be used to connect as
+# soon as the call is received.
+# By default this feature is turned off.
+#h323_ringconnect
+
+# Specify which codecs may be used for H323 calls
+# "h323_law" ALaw and muLaw codec which requre more than 64k internet
+# connection cause by overhead. The parameter defines the frame
+# size. The size range is 10 - 240.
+# "h323_g726" The adpcm codec G726. The parameter defines the bits per sample.
+# The bits must be 2, 3, 4, or 5. (16, 24, 32, 40 kbits/s)
+# The given value will always include all modes with lower value.
+# "h323_gsm" GSM0610 and MicrosoftGSM codecs (not compatible with netmeeting)
+# The prameter defines the frame size. The frame range is 1 - 7.
+# "h323_lpc10" Codec with very low bandwith usage which can even be used on
+# slow internetconnections like 9600 kBit (about 300 bytes/s)
+# "h323_speex" Non standard Speex codec. The parameter defines the mode.
+# The mode range is 2 - 6.
+# The given value will always include all modes with lower value.
+# "h323_xspeex" Non standard XiphSpeex codec. The parameter defines the mode.
+# The mode range is 2 - 6.
+# The given value will always include all modes with lower value.
+# The priority of the codecs to use is given by it's order.
+# By default, no codec is used
+h323_gsm 4
+h323_g726 2
+#h323_lpc10
+#h323_speex 4
+#h323_xspeex 4
+h323_law 64
+
+# To allow incoming calls via H323, the following option is used:
+# "h323_icall [<prefix>]"
+# The given prefix is used for incoming calls which do not send any dialing
+# information. If you like to route calls to an extension, give extension
+# dialing as specified at numbering_ext.conf.
+# By default no calls are accepted.
+# Omit the prefix and it must be dialed by the caller.
+h323_icall 0
+
+# Specify the port to listen on incoming H323 connections.
+# The default value is 1720.
+#h323_port 1720
+
+# To register with a gatekeeper, the following option is used:
+# "h323_gatekeeper [<host or ip>]
+# If no parameter is given, the gatekeeper is searched automatically.
+#h323_gatekeeper
+
+# To use dtmf detection for call from or to ISDN, uncomment the keyword "dtmf".
+# By default dtmf detection is used. Note that dtmf detection needs cpu time.
+# Dtmf detection is essential when handling the call after connect using
+# keypad. (conferrence, callback, ect...)
+#nodtmf
+
+# For calls to external where caller id is not available, this id is used.
+# It is sent of type "subscriber number". This ID is only usefull if the
+# external line will not screen caller id. It will be sent anonymous.
+# If you don't know what to use it for, you don't need it.
+# Default is nothing.
+#dummyid 0
+
+# If your external ISDN line(s) support inband patterns prior call connect,
+# you may say 'yes' here. In this case the PBX's tones are used for incoming
+# calls. This may require a special subscription because it can be abused
+# to transfer audio prior charge of call
+#inbandpattern no
+
+# Tones/announcements are streamed from user space. It is possible to use
+# the module "mISDN_dsp.o" instead. It provides simple tones with much less cpu
+# usage. If supported by special hardware, tones are loops that require no
+# bus/cpu load at all, except when the tone changes.
+# This works only for ISDN ports. It can be overridden by extension's tone set.
+# Defautlt is streaming of tones. Use parameter "american", "german", or
+# "oldgerman". "oldgerman" sounds like the old german telephone system (POTS).
+#dsptones none
+
+# Source email address of the PBX. E.g. it is used when sending a mail
+# from the voice box. It is not the address the mails are sent to.
+# Most mail servers require an existing domain in order to accept mails.
+#email pbx@jolly.de
+
projects / lcr.git / blobdiff