/*****************************************************************************\
** **
-** PBX4Linux **
+** Linux Call Router **
** **
**---------------------------------------------------------------------------**
** Copyright: Andreas Eversberg **
{
struct message *message;
unsigned long tosend;
- signed short buffer[128];
+ unsigned char buffer[ISDN_TRANSMIT];
time_t currenttime;
class Endpoint *epoint;
int ret;
}
}
+ /* set time the first time */
if (p_vbox_audio_start < 1)
{
- /* set time the first time */
p_vbox_audio_start = now_d;
- } else
- {
- /* calculate the number of bytes */
- tosend = (unsigned long)((now_d-p_vbox_audio_start)*8000) - p_vbox_audio_transferred;
-
- /* wait for more */
- if (tosend < 32)
- return(Port::handler());
-
- /* too many samples, so we just process 128 bytes until the next call of handler() */
- if (tosend > 128)
- tosend = 128;
+ return(0);
+ }
+
+ /* calculate the number of bytes */
+ tosend = (unsigned long)((now_d-p_vbox_audio_start)*8000) - p_vbox_audio_transferred;
- /* dummy read, to clock record buffer */
- read_audio((unsigned char *)buffer, tosend, 0);
+ /* wait for more */
+ if (tosend < sizeof(buffer))
+ return(0);
+ tosend = sizeof(buffer);
- /* add the number of samples elapsed */
- p_vbox_audio_transferred += tosend;
+ /* add the number of samples elapsed */
+ p_vbox_audio_transferred += tosend;
- /* if announcement is currently played, send audio data */
- if (p_vbox_announce_fh >=0)
+ /* if announcement is currently played, send audio data */
+ if (p_vbox_announce_fh >=0)
+ {
+ tosend = read_tone(p_vbox_announce_fh, buffer, p_vbox_announce_codec, tosend, p_vbox_announce_size, &p_vbox_announce_left, 1);
+ if (tosend <= 0)
{
- tosend = read_tone(p_vbox_announce_fh, buffer, p_vbox_announce_codec, tosend, p_vbox_announce_size, &p_vbox_announce_left, 1);
- if (tosend <= 0)
- {
- /* end of file */
- close(p_vbox_announce_fh);
- p_vbox_announce_fh = -1;
- fhuse--;
-
- time(¤ttime);
- p_vbox_record_start = currenttime;
+ /* end of file */
+ close(p_vbox_announce_fh);
+ p_vbox_announce_fh = -1;
+ fhuse--;
- /* connect if not already */
- epoint = find_epoint_id(ACTIVE_EPOINT(p_epointlist));
- if (epoint)
- {
- /* if we sent our announcement during ringing, we must now connect */
- if (p_vbox_apppbx->e_ext.vbox_free)
- {
- /* send connect message */
- message = message_create(p_serial, ACTIVE_EPOINT(p_epointlist), PORT_TO_EPOINT, MESSAGE_CONNECT);
- memcpy(&message->param.connectinfo, &p_connectinfo, sizeof(struct connect_info));
- message_put(message);
- new_state(PORT_STATE_CONNECT);
- }
- }
+ time(¤ttime);
+ p_vbox_record_start = currenttime;
- /* start recording, if not already */
- if (p_vbox_mode == VBOX_MODE_NORMAL)
- {
- /* send recording start message */
- message = message_create(p_serial, ACTIVE_EPOINT(p_epointlist), PORT_TO_EPOINT, MESSAGE_VBOX_RECORD);
- message_put(message);
- } else // else!!
- if (p_vbox_mode == VBOX_MODE_ANNOUNCEMENT)
+ /* connect if not already */
+ epoint = find_epoint_id(ACTIVE_EPOINT(p_epointlist));
+ if (epoint)
+ {
+ /* if we sent our announcement during ringing, we must now connect */
+ if (p_vbox_ext.vbox_free)
{
- /* send release */
- message = message_create(p_serial, ACTIVE_EPOINT(p_epointlist), PORT_TO_EPOINT, MESSAGE_RELEASE);
- message->param.disconnectinfo.cause = 16;
- message->param.disconnectinfo.location = LOCATION_PRIVATE_LOCAL;
+ /* send connect message */
+ message = message_create(p_serial, ACTIVE_EPOINT(p_epointlist), PORT_TO_EPOINT, MESSAGE_CONNECT);
+ memcpy(&message->param.connectinfo, &p_connectinfo, sizeof(struct connect_info));
message_put(message);
- /* recording is close during destruction */
- delete this;
- return(-1); /* must return because port is gone */
+ new_state(PORT_STATE_CONNECT);
}
- } else
+ }
+
+ /* start recording, if not already */
+ if (p_vbox_mode == VBOX_MODE_NORMAL)
{
- message = message_create(p_serial, ACTIVE_EPOINT(p_epointlist), PORT_TO_EPOINT, MESSAGE_DATA);
- message->param.data.port_type = p_type;
- message->param.data.port_id = p_serial;
- message->param.data.len = tosend;
- memcpy(message->param.data.data, buffer, tosend);
+ /* recording start */
+ open_record(p_vbox_ext.vbox_codec, 2, 0, p_vbox_ext.number, p_vbox_ext.anon_ignore, p_vbox_ext.vbox_email, p_vbox_ext.vbox_email_file);
+ } else // else!!
+ if (p_vbox_mode == VBOX_MODE_ANNOUNCEMENT)
+ {
+ /* send release */
+ message = message_create(p_serial, ACTIVE_EPOINT(p_epointlist), PORT_TO_EPOINT, MESSAGE_RELEASE);
+ message->param.disconnectinfo.cause = 16;
+ message->param.disconnectinfo.location = LOCATION_PRIVATE_LOCAL;
message_put(message);
+ /* recording is close during destruction */
+ delete this;
+ return(-1); /* must return because port is gone */
}
+ } else
+ {
+ if (p_record)
+ record(buffer, tosend, 0); // from down
+ message = message_create(p_serial, ACTIVE_EPOINT(p_epointlist), PORT_TO_EPOINT, MESSAGE_DATA);
+ message->param.data.len = tosend;
+ memcpy(message->param.data.data, buffer, tosend);
+ message_put(message);
}
-
}
+
return(1);
}
struct message *message;
class Endpoint *epoint;
char filename[256], *c;
- class EndpointAppPBX *eapp;
if (Port::message_epoint(epoint_id, message_id, param))
return(1);
switch(message_id)
{
+ case MESSAGE_DATA:
+ record(param->data.data, param->data.len, 1); // from up
+ return(1);
+
case MESSAGE_DISCONNECT: /* call has been disconnected */
PDEBUG(DEBUG_VBOX, "PORT(%s) vbox port with (caller id %s) received disconnect cause=%d\n", p_name, p_callerinfo.id, param->disconnectinfo.cause);
case MESSAGE_SETUP: /* dial-out command received from epoint, answer with connect */
/* get apppbx */
- eapp = (class EndpointAppPBX *)(epoint->ep_app);
- p_vbox_apppbx = eapp;
+ memcpy(&p_vbox_ext, &((class EndpointAppPBX *)(epoint->ep_app))->e_ext, sizeof(p_vbox_ext));
/* extract optional announcement file */
- if ((c = strchr(param->setup.dialinginfo.number, ',')))
+ if ((c = strchr(param->setup.dialinginfo.id, ',')))
{
if (c[1] == '/')
SPRINT(filename, c+1);
else
- SPRINT(filename, "%s/%s/%s/vbox/%s", INSTALL_DATA, options.extensions_dir, p_vbox_apppbx->e_terminal);
+ SPRINT(filename, "%s/%s/%s/vbox/%s", INSTALL_DATA, options.extensions_dir, p_vbox_ext.number);
*c = '\0';
} else
{
- SPRINT(filename, "%s/%s/%s/vbox/announcement", INSTALL_DATA, options.extensions_dir, p_vbox_apppbx->e_terminal);
+ SPRINT(filename, "%s/%s/%s/vbox/announcement", INSTALL_DATA, options.extensions_dir, p_vbox_ext.number);
}
- PDEBUG(DEBUG_VBOX, "PORT(%s) vbox port received setup from '%s' to '%s'\n", p_name, param->setup.callerinfo.id, param->setup.dialinginfo.number);
+ PDEBUG(DEBUG_VBOX, "PORT(%s) vbox port received setup from '%s' to '%s'\n", p_name, param->setup.callerinfo.id, param->setup.dialinginfo.id);
memcpy(&p_callerinfo, ¶m->setup.callerinfo, sizeof(p_callerinfo));
memcpy(&p_redirinfo, ¶m->setup.redirinfo, sizeof(p_redirinfo));
/* link relation */
if (p_epointlist)
- {
- PERROR("PORT(%s) software error: epoint pointer is set in idle state, how bad!! exitting.\n", p_name);
- exit(-1);
- }
- if (!(epointlist_new(epoint_id)))
- {
- PERROR("no memory for epointlist\n");
- exit(-1);
- }
+ FATAL("PORT(%s) Epoint pointer is set in idle state, how bad!!\n", p_name);
+ epointlist_new(epoint_id);
/* copy setup infos to port */
- SCPY(p_vbox_extension, param->setup.dialinginfo.number);
+ SCPY(p_vbox_extension, param->setup.dialinginfo.id);
/* create connect info */
SCPY(p_connectinfo.id, p_vbox_extension);
p_connectinfo.screen = INFO_SCREEN_NETWORK;
/* connect unless we can send announcement while ringing */
- if (!p_vbox_apppbx->e_ext.vbox_free)
+ if (!p_vbox_ext.vbox_free)
{
/* send connect message */
message = message_create(p_serial, epoint_id, PORT_TO_EPOINT, MESSAGE_CONNECT);
new_state(PORT_STATE_IN_ALERTING);
}
- /* start recording during announcement */
- /* start parallel recording if desired */
- p_vbox_mode = p_vbox_apppbx->e_ext.vbox_mode;
- p_vbox_record_limit = p_vbox_apppbx->e_ext.vbox_time;
- if (p_vbox_mode == VBOX_MODE_PARALLEL)
- {
- /* send recording start message */
- message = message_create(p_serial, epoint_id, PORT_TO_EPOINT, MESSAGE_VBOX_RECORD);
- message_put(message);
- }
/* play the announcement */
if ((p_vbox_announce_fh = open_tone(filename, &p_vbox_announce_codec, &p_vbox_announce_size, &p_vbox_announce_left)) >= 0)
{
fhuse++;
- } else
+ }
+ /* start recording if desired */
+ p_vbox_mode = p_vbox_ext.vbox_mode;
+ p_vbox_record_limit = p_vbox_ext.vbox_time;
+ if (!p_vbox_announce_fh || p_vbox_mode==VBOX_MODE_PARALLEL)
{
- PDEBUG(DEBUG_VBOX, "PORT(%s) no announcement found at: '%s' so we start recording now.\n", p_name, filename);
- /* send recording start message */
- message = message_create(p_serial, epoint_id, PORT_TO_EPOINT, MESSAGE_VBOX_RECORD);
- message_put(message);
+ PDEBUG(DEBUG_VBOX, "PORT(%s) parallel mode OR no announcement found at: '%s' so we start recording now.\n", p_name, filename);
+ /* recording start */
+ open_record(p_vbox_ext.vbox_codec, 2, 0, p_vbox_ext.number, p_vbox_ext.anon_ignore, p_vbox_ext.vbox_email, p_vbox_ext.vbox_email_file);
}
break;
projects / lcr.git / blobdiff