X-Git-Url: http://git.eversberg.eu/gitweb.cgi?p=lcr.git;a=blobdiff_plain;f=default%2Finterface.conf;h=85e53f1ec15ca62c56bfe639d044c9e1dad2f04d;hp=3a8b74d60ea7b316979ff41b0fb08e6a0afa42ee;hb=feea42c7f7f2e171c1490bd0d3af09beba629f21;hpb=613b4e59ef4e8324ea824dfee01d9ec800071636

diff --git a/default/interface.conf b/default/interface.conf
index 3a8b74d..85e53f1 100644
--- a/default/interface.conf
+++ b/default/interface.conf
@@ -2,45 +2,50 @@
 ################
 
 
-# Example of an ISDN interface on port 1
+# Example of an ISDN interface on port 0
 
 #[Ext]
-#port 1
+#external
+#portnum 0
 
-# Example of a multilink ISDN interface (Anlagenanschluss) on port 3
-# and 4
+# Example of a multilink ISDN interface (Anlagenanschluss) on port 2
+# and 3
 
 #[Ext]
-#port 3
-#port 4
+#external
+#portnum 2
+#portnum 3
 
-# Example of an PTP ISDN interface on port 1
+
+# Example of an PTP ISDN interface on port 0
 # Layer-2-Hold is required to keep link alive.
 
 #[Ext]
-#port 1
+#external
+#portnum 0
 #ptp
 #layer2hold yes
 
-# Example of an internal ISDN interface on port 2, which accepts all extensions
+
+# Example of an internal ISDN interface on port 1, which accepts all extensions
 
 #[Int]
 #extension
-#port 2
+#portnum 1
 #nt
 
 
-# Example of an ISDN interface on port 2, which accepts only extensions
+# Example of an ISDN interface on port 1, which accepts only extensions
 # 201, 202 and 203
 
 #[Int]
 #extension
 #msn 201,202,203
-#port 2
+#portnum 1
 #nt
 
 
-# Example of three ISDN interfaces on port 2, 3 and 4, which accept
+# Example of three ISDN interfaces on port 1, 2 and 3, which accept
 # extension 201 on all interfaces, and extension 202 and 203 on the first port
 # only.
 # Hint: To make extension ring on all three interfaces parallel, use
@@ -49,72 +54,141 @@
 #[Int1]
 #extension
 #msn 201,202,203
-#port 2
+#portnum 1
 #nt
 
 #[Int2]
 #extension
 #msn 201
-#port 3
+#portnum 2
 #nt
 
 #[Int3]
 #extension
 #msn 201
-#port 4
+#portnum 3
 #nt
 
 
-# Example of an ISDN interface on port 1 that requires screening of caller IDs.
+# Example of an ISDN interface on port 0 that requires screening of caller IDs.
 # This is required if the connected line doesn't screen caller IDs.
 # Also this interface will connect bchannel during call setup, so tones are
 # required.
+
 #[Ext]
+#external
 #screen-out unknown 300  national 21250993300
 #screen-out unknown 2*  national 212509932*
 #tones yes
-#port 1
+#portnum 0
 
 
-# Example of an ISDN PRI interface on port 1 that has directed channels.
+# Example of an ISDN PRI interface on port 0 that has directed channels.
 # 10 channels (channel 1-10) are incomming only.
 # 10 channels (channel 11-15,17-21) are outgoing only.
 # 10 channels (channel 22-31) are both way.
 # We prefer to use directed channels first, then we request any channel.
 # Outgoing calls on both-way-channels shall be indicated as "any channel".
 # (Siemens EWSD will select bot-way-channels when indicated that way.)
+
 #[Ext]
-#port 1
+#external
+#portnum 0
 #layer2hold
 #channel-in 1,2,3,4,5,6,7,8,9,10,22,23,24,25,26,27,28,29,30,31
 #channel-out force,11,12,13,14,15,17,18,19,20,21,any
 
+
 # Example of an ISDN interface that runs in NT-mode, but provides tones during
 # setup. Also we provide tones during setup also.
 # This is usefull to interconnect to another PBX.
 # Additinally the timeout values for the different call states are adjusted to 60 seconds.
 # They are: setup, dialing, proceeding, alerting, disconnect
+
 #[PBX]
-#port 5
+#portnum 4
 #nt
 #layer2hold yes
 #earlyb yes
 #tones yes
 #timeouts 60 60 60 60 60
 
+
+# Example of an interface on port 0 connected to another LCR
+# This can be done by direct cross cable (terminated of course) or via L1oIP.
+# Since the remote side (NT-mode) normally doesn't accept informations like
+# redirected number or display facility, use 'te-special' to even transmit that
+# against the ISDN specifications. A remote LCR can handle that.
+# Now all information elements can be transmitted in both directions.
+
+#[Ext]
+#external
+#portnum 0
+#te-special
+
+
+# Alternatively give port name. You will find the name with 'isdninfo' tool.
+
+#[Int2]
+#portname hfc-s_usb.1
+#nt
+
+
+# The remote switch may reject extreamly large numbers to be dialed during
+# setup message. Define a limit of maximum numbers to dial. The rest of
+# digits will be dialed after setup via overlap dialing.
+
+#[Ext]
+#external
+#portnum 0
+#dialmax 20
+
+
+# Example of an ISDN interface on port 1, with alternate tones_dir to use.
+# In this case, the tones are "german" tones generated by mISDN_dsp.ko.
+# It is possible to give different sample sets, like "tones_german".
+
+#[Int]
+#extension
+#msn 201,202,203
+#tones_dir german
+#portnum 1
+#nt
+
+
+# A special case for GSM interface.
+# Don't remove/change the settings, they will cause undefined behaviour
+# of LCR. The actual interface is defined in gsm.conf.
+# You may add 'extension' and 'mns' keywords to turn all your subscribers
+# in you GSM network to internal 'extensions'.
+# The MSN numbers will equal the subscriber number.
+#[GSM]
+#gsm
+#nt
+#layer1hold no
+#layer2hold no
+#tones yes
+#earlyb no
+#channel-in free
+#channel-out any
+#nodtmf
+
+
 # Hint: Enter "lcr interface" for quick help on interface options.
 
+
 # Add your interfaces here:
 
 
 [Ext]
-port 1
+external
+portnum 0
 
 
 [Int]
 extension
 msn 200,201,202,203
-port 2
+portnum 1
 nt