struct lcr_msg *message;
int rc;
- rc = join_join();
+#if 0
+ /* bridge for real */
+ if (param->threepty.begin)
+ rc = join_join();
+ else if (param->threepty.end)
+ rc = -ENOTSUP;
+ else
+ return;
+#else
+ /* 3PTY bridge */
+ if (param->threepty.begin)
+ rc = join_3pty();
+ else if (param->threepty.end)
+ rc = split_3pty();
+ else
+ return;
+#endif
+
message = message_create(ea_endpoint->ep_serial, portlist->port_id, EPOINT_TO_PORT, MESSAGE_3PTY);
- message->param.threepty.begin = 1;
+ message->param.threepty.begin = param->threepty.begin;
+ message->param.threepty.end = param->threepty.end;
if (rc < 0)
message->param.threepty.error = 1;
else
{
#ifdef WITH_MISDN
struct lcr_msg *message;
- struct join_relation *our_relation, *other_relation;
- struct join_relation **our_relation_pointer, **other_relation_pointer;
- class Join *our_join, *other_join;
- class JoinPBX *our_joinpbx, *other_joinpbx;
- class EndpointAppPBX *other_eapp; class Endpoint *temp_epoint;
+ struct join_relation *add_relation, *remove_relation;
+ struct join_relation **add_relation_pointer, **remove_relation_pointer;
+ class Join *our_join, *other_join, *add_join, *remove_join;
+ class JoinPBX *our_joinpbx, *other_joinpbx, *add_joinpbx, *remove_joinpbx;
+ class EndpointAppPBX *other_eapp, *remove_eapp;
class Port *our_port, *other_port;
class Pdss1 *our_pdss1, *other_pdss1;
+ class Endpoint *temp_epoint;
/* are we a candidate to join a join? */
our_join = find_join_id(ea_endpoint->ep_join_id);
}
our_pdss1 = (class Pdss1 *)our_port;
- /* find an endpoint that is on hold and has the same mISDNport that we are on */
+ /* find an endpoint that has the same mISDNport/ces that we are on */
other_eapp = apppbx_first;
while(other_eapp) {
if (other_eapp == this) {
return -1;
}
+ /* now find out which is ACTIVE-IDLE and which is ACTIVE-HELD */
+ if (our_pdss1->p_m_hold && !other_pdss1->p_m_hold) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) our relation is on hold and other is active, so we move our relations to other relations\n", ea_endpoint->ep_serial);
+ remove_eapp = this;
+ remove_join = our_join;
+ remove_joinpbx = our_joinpbx;
+ add_join = other_join;
+ add_joinpbx = other_joinpbx;
+ } else {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) our relation is active or other is on hold, so we move ohter relations to our relations\n", ea_endpoint->ep_serial);
+ remove_eapp = other_eapp;
+ remove_join = other_join;
+ remove_joinpbx = other_joinpbx;
+ add_join = our_join;
+ add_joinpbx = our_joinpbx;
+ }
+
/* remove relation to endpoint for join on hold */
- other_relation = other_joinpbx->j_relation;
- other_relation_pointer = &other_joinpbx->j_relation;
- while(other_relation) {
- if (other_relation->epoint_id == other_eapp->ea_endpoint->ep_serial) {
- /* detach other endpoint on hold */
- *other_relation_pointer = other_relation->next;
- FREE(other_relation, sizeof(struct join_relation));
+ remove_relation = remove_joinpbx->j_relation;
+ remove_relation_pointer = &remove_joinpbx->j_relation;
+ while(remove_relation) {
+ if (remove_relation->epoint_id == remove_eapp->ea_endpoint->ep_serial) {
+ /* detach other endpoint */
+ *remove_relation_pointer = remove_relation->next;
+ FREE(remove_relation, sizeof(struct join_relation));
cmemuse--;
- other_relation = *other_relation_pointer;
- other_eapp->ea_endpoint->ep_join_id = 0;
+ remove_relation = *remove_relation_pointer;
+ remove_eapp->ea_endpoint->ep_join_id = 0;
continue;
}
/* change join/hold pointer of endpoint to the new join */
- temp_epoint = find_epoint_id(other_relation->epoint_id);
+ temp_epoint = find_epoint_id(remove_relation->epoint_id);
if (temp_epoint) {
- if (temp_epoint->ep_join_id == other_join->j_serial)
- temp_epoint->ep_join_id = our_join->j_serial;
+ if (temp_epoint->ep_join_id == remove_join->j_serial)
+ temp_epoint->ep_join_id = add_join->j_serial;
}
- other_relation_pointer = &other_relation->next;
- other_relation = other_relation->next;
+ remove_relation_pointer = &remove_relation->next;
+ remove_relation = remove_relation->next;
}
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d) endpoint on hold removed, other enpoints on join relinked (to our join).\n", ea_endpoint->ep_serial);
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) endpoint removed, other enpoints on join relinked.\n", ea_endpoint->ep_serial);
/* join call relations */
- our_relation = our_joinpbx->j_relation;
- our_relation_pointer = &our_joinpbx->j_relation;
- while(our_relation) {
- our_relation_pointer = &our_relation->next;
- our_relation = our_relation->next;
- }
- *our_relation_pointer = other_joinpbx->j_relation;
- other_joinpbx->j_relation = NULL;
+ add_relation = add_joinpbx->j_relation;
+ add_relation_pointer = &add_joinpbx->j_relation;
+ while(add_relation) {
+ add_relation_pointer = &add_relation->next;
+ add_relation = add_relation->next;
+ }
+ *add_relation_pointer = remove_joinpbx->j_relation;
+ remove_joinpbx->j_relation = NULL;
PDEBUG(DEBUG_EPOINT, "EPOINT(%d) relations joined.\n", ea_endpoint->ep_serial);
- /* release endpoint on hold */
- message = message_create(other_joinpbx->j_serial, other_eapp->ea_endpoint->ep_serial, JOIN_TO_EPOINT, MESSAGE_RELEASE);
+ /* release endpoint */
+ message = message_create(remove_joinpbx->j_serial, remove_eapp->ea_endpoint->ep_serial, JOIN_TO_EPOINT, MESSAGE_RELEASE);
message->param.disconnectinfo.cause = CAUSE_NORMAL; /* normal */
message->param.disconnectinfo.location = LOCATION_PRIVATE_LOCAL;
message_put(message);
/* if we are not a partyline, we get partyline state from other join */
- our_joinpbx->j_partyline += other_joinpbx->j_partyline;
+ add_joinpbx->j_partyline += remove_joinpbx->j_partyline;
/* remove empty join */
- delete other_join;
- PDEBUG(DEBUG_EPOINT, "EPOINT(%d)d-join completely removed!\n");
+ delete remove_join;
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d)join completely removed!\n", ea_endpoint->ep_serial);
+
+ /* mixer must update */
+ trigger_work(&add_joinpbx->j_updatebridge);
+
+ /* we send a retrieve to that endpoint */
+ // mixer will update the hold-state of the join and send it to the endpoints is changes
+#else
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: no mISDN support anyway.\n", ea_endpoint->ep_serial);
+#endif
+
+ return 0;
+}
+
+int EndpointAppPBX::join_3pty(void)
+{
+#ifdef WITH_MISDN
+ class Join *our_join, *other_join;
+ class JoinPBX *our_joinpbx, *other_joinpbx;
+ class EndpointAppPBX *other_eapp;
+ class Port *our_port, *other_port;
+ class Pdss1 *our_pdss1, *other_pdss1;
+
+ /* are we a candidate to join a join? */
+ our_join = find_join_id(ea_endpoint->ep_join_id);
+ if (!our_join) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: our join doesn't exist anymore.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ if (our_join->j_type != JOIN_TYPE_PBX) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: join is not a pbx join.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ our_joinpbx = (class JoinPBX *)our_join;
+ if (!ea_endpoint->ep_portlist) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: we have no port.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ if (!e_ext.number[0]) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: we are not internal extension.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ our_port = find_port_id(ea_endpoint->ep_portlist->port_id);
+ if (!our_port) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: our port doesn't exist anymore.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ if ((our_port->p_type & PORT_CLASS_mISDN_MASK) != PORT_CLASS_DSS1) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: our port is not isdn.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ our_pdss1 = (class Pdss1 *)our_port;
+
+ /* find an endpoint that has the same mISDNport/ces that we are on */
+ other_eapp = apppbx_first;
+ while(other_eapp) {
+ if (other_eapp == this) {
+ other_eapp = other_eapp->next;
+ continue;
+ }
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) comparing other endpoint candiate: (ep%d) terminal='%s' port=%s join=%d.\n", ea_endpoint->ep_serial, other_eapp->ea_endpoint->ep_serial, other_eapp->e_ext.number, (other_eapp->ea_endpoint->ep_portlist)?"YES":"NO", other_eapp->ea_endpoint->ep_join_id);
+ if (other_eapp->e_ext.number[0] /* has terminal */
+ && other_eapp->ea_endpoint->ep_portlist /* has port */
+ && other_eapp->ea_endpoint->ep_join_id) { /* has join */
+ other_port = find_port_id(other_eapp->ea_endpoint->ep_portlist->port_id);
+ if (other_port) { /* port still exists */
+ if (other_port->p_type==PORT_TYPE_DSS1_NT_OUT
+ || other_port->p_type==PORT_TYPE_DSS1_NT_IN) { /* port is isdn nt-mode */
+ other_pdss1 = (class Pdss1 *)other_port;
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) comparing other endpoint's port is of type isdn! comparing our portnum=%d with other's portnum=%d hold=%s ces=%d\n", ea_endpoint->ep_serial, our_pdss1->p_m_mISDNport->portnum, other_pdss1->p_m_mISDNport->portnum, (other_pdss1->p_m_hold)?"YES":"NO", other_pdss1->p_m_d_ces);
+ if (1 //other_pdss1->p_m_hold /* port is on hold */
+ && other_pdss1->p_m_mISDNport == our_pdss1->p_m_mISDNport /* same isdn interface */
+ && other_pdss1->p_m_d_ces == our_pdss1->p_m_d_ces) /* same tei+sapi */
+ break;
+ } else {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) comparing other endpoint's port is of other type!\n", ea_endpoint->ep_serial);
+ }
+ } else {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) comparing other endpoint's port doesn't exist enymore.\n", ea_endpoint->ep_serial);
+ }
+ }
+ other_eapp = other_eapp->next;
+ }
+ if (!other_eapp) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: no other endpoint on same isdn terminal.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) port with same terminal found.\n", ea_endpoint->ep_serial);
+
+ /* if we have the same join */
+ if (other_eapp->ea_endpoint->ep_join_id == ea_endpoint->ep_join_id) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: we and the other have the same join.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ other_join = find_join_id(other_eapp->ea_endpoint->ep_join_id);
+ if (!other_join) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: other join doesn't exist anymore.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ if (other_join->j_type != JOIN_TYPE_PBX) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: other join is not a pbx join.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ other_joinpbx = (class JoinPBX *)other_join;
+ if (our_joinpbx->j_partyline && other_joinpbx->j_partyline) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: both joins are partylines.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+
+ if (our_joinpbx->j_3pty) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: our join already doing 3PTY.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ if (other_joinpbx->j_3pty) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot join: other join already doing 3PTY.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+
+ /* set 3PTY bridge */
+ other_joinpbx->j_3pty = our_joinpbx->j_serial;
+ our_joinpbx->j_3pty = other_joinpbx->j_serial;
/* mixer must update */
trigger_work(&our_joinpbx->j_updatebridge);
+ trigger_work(&other_joinpbx->j_updatebridge);
/* we send a retrieve to that endpoint */
// mixer will update the hold-state of the join and send it to the endpoints is changes
return 0;
}
+int EndpointAppPBX::split_3pty(void)
+{
+#ifdef WITH_MISDN
+ class Join *our_join, *other_join;
+ class JoinPBX *our_joinpbx, *other_joinpbx;
+
+ /* are we a candidate to join a join? */
+ our_join = find_join_id(ea_endpoint->ep_join_id);
+ if (!our_join) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot split: our join doesn't exist anymore.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ if (our_join->j_type != JOIN_TYPE_PBX) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot split: join is not a pbx join.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ our_joinpbx = (class JoinPBX *)our_join;
+
+ if (!our_joinpbx->j_3pty) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot split: we don't have a 3PTY.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+
+ other_join = find_join_id(our_joinpbx->j_3pty);
+ if (!other_join) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot split: other join doesn't exist anymore.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ if (other_join->j_type != JOIN_TYPE_PBX) {
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot split: join is not a pbx join.\n", ea_endpoint->ep_serial);
+ return -1;
+ }
+ other_joinpbx = (class JoinPBX *)other_join;
+
+ our_joinpbx->j_3pty = 0;
+ other_joinpbx->j_3pty = 0;
+
+ /* mixer must update */
+ trigger_work(&our_joinpbx->j_updatebridge);
+ trigger_work(&other_joinpbx->j_updatebridge);
+
+ /* we send a retrieve to that endpoint */
+ // mixer will update the hold-state of the join and send it to the endpoints is changes
+#else
+ PDEBUG(DEBUG_EPOINT, "EPOINT(%d) cannot split: no mISDN support anyway.\n", ea_endpoint->ep_serial);
+#endif
+
+ return 0;
+}
/* check if we have an external call
* this is used to check for encryption ability
j_pid = getpid();
j_partyline = 0;
j_partyline_jingle = 0;
+ j_3pty = 0;
j_multicause = 0;
j_multilocation = 0;
memset(&j_updatebridge, 0, sizeof(j_updatebridge));
relation = rtemp;
}
+ /* remove 3PTY from other join */
+ if (j_3pty) {
+ class Join *join;
+ class JoinPBX *joinpbx;
+
+ join = find_join_id(j_3pty);
+ if (join && join->j_type == JOIN_TYPE_PBX) {
+ joinpbx = (class JoinPBX *)join;
+ joinpbx->j_3pty = 0;
+ trigger_work(&joinpbx->j_updatebridge);
+ }
+ }
+
del_work(&j_updatebridge);
}
class Endpoint *epoint;
struct port_list *portlist;
class Port *port;
+ unsigned int bridge_id;
#ifdef DEBUG_COREBRIDGE
int allmISDN = 0; // never set for debug purpose
#else
int allmISDN = 1; // set until a non-mISDN relation is found
#endif
+ /* bridge id is the serial of join
+ * if we have a 3pty with another join, we always use the lowest brigde id.
+ * this way we use common ids, so both joins share same bridge */
+ if (j_3pty && j_3pty < j_serial)
+ bridge_id = j_3pty;
+ else
+ bridge_id = j_serial;
+
relation = j_relation;
while(relation) {
/* count all relations */
numconnect ++;
/* remove unconnected parties from conference, also remove remotely disconnected parties so conference will not be disturbed. */
+
+ /* mISDN */
if (relation->channel_state == 1
&& relation->rx_state != NOTIFY_STATE_HOLD
&& relation->rx_state != NOTIFY_STATE_SUSPEND
&& allmISDN) { // no conf if any member is not mISDN
message = message_create(j_serial, relation->epoint_id, JOIN_TO_EPOINT, MESSAGE_mISDNSIGNAL);
message->param.mISDNsignal.message = mISDNSIGNAL_CONF;
- message->param.mISDNsignal.conf = j_serial<<16 | j_pid;
+ message->param.mISDNsignal.conf = (bridge_id << 16) | j_pid;
PDEBUG(DEBUG_JOIN, "join%d EP%d +on+ id: 0x%08x\n", j_serial, relation->epoint_id, message->param.mISDNsignal.conf);
message_put(message);
} else {
message_put(message);
}
- /*
- * Bridge between port instances if:
- * - two or more relations
- * - one or all are not mISDN
- */
- message = message_create(j_serial, relation->epoint_id, JOIN_TO_EPOINT, MESSAGE_BRIDGE);
- message->param.bridge_id = (relations>=2 && !allmISDN) ? j_serial : 0;
- PDEBUG(DEBUG_JOIN, "join%u EP%u requests bridge=%u\n", j_serial, relation->epoint_id, message->param.bridge_id);
- message_put(message);
+ /* core bridge */
+ if (relation->channel_state == 1
+ && relation->rx_state != NOTIFY_STATE_HOLD
+ && relation->rx_state != NOTIFY_STATE_SUSPEND
+ && relations>1 // no bridge with one member
+ && !allmISDN) { // no bridge if all members are mISDN
+ message = message_create(j_serial, relation->epoint_id, JOIN_TO_EPOINT, MESSAGE_BRIDGE);
+ message->param.bridge_id = bridge_id;
+ PDEBUG(DEBUG_JOIN, "join%u EP%u requests bridge=%u\n", j_serial, relation->epoint_id, bridge_id);
+ message_put(message);
+ } else {
+ message = message_create(j_serial, relation->epoint_id, JOIN_TO_EPOINT, MESSAGE_BRIDGE);
+ message->param.bridge_id = 0;
+ PDEBUG(DEBUG_JOIN, "join%u EP%u drop bridge=%u\n", j_serial, relation->epoint_id, bridge_id);
+ message_put(message);
+ }
relation = relation->next;
}
/* two people just exchange their states */
- if (relations==2 && !j_partyline) {
+ if (!j_3pty && relations==2 && !j_partyline) {
PDEBUG(DEBUG_JOIN, "join%d 2 relations / no partyline\n", j_serial);
relation = j_relation;
relation->tx_state = notify_state_change(j_serial, relation->epoint_id, relation->tx_state, relation->next->rx_state);
relation->next->tx_state = notify_state_change(j_serial, relation->next->epoint_id, relation->next->tx_state, relation->rx_state);
} else
/* one member in a join, so we put her on hold */
- if ((relations==1 || numconnect==1)/* && !j_partyline_jingle*/) {
+ if (!j_3pty && (relations==1 || numconnect==1)/* && !j_partyline_jingle*/) {
PDEBUG(DEBUG_JOIN, "join%d 1 member or only 1 connected, put on hold\n", j_serial);
relation = j_relation;
while(relation) {