-# Internal/external ports (cards connected to your isdn line)
-# MUST be the card number. Use "./pbx query" to list.
-# Add "ptp" for using internal port as point-to-point. (Only required for NT mode ports.)
-# Example: port 2
-# port 3 ptp
-port 2
-port 3
-
-# Specify the H323 endpoint name. If omitted the hostname is used.
-#h323_name PBX4Linux
-
-# Incoming H323 calls can be connected prior answer, because some clients will
-# not play any inband tones during ringing, they just wait as nothing would
-# happen.
-# This only works for external calls. If a H323 caller is authenticated via
-# h323_gateway.conf, a special "connect" option may be used to connect as
-# soon as the call is received.
-# By default this feature is turned off.
-#h323_ringconnect
-
-# Specify which codecs may be used for H323 calls
-# "h323_law" ALaw and muLaw codec which requre more than 64k internet
-# connection cause by overhead. The parameter defines the frame
-# size. The size range is 10 - 240.
-# "h323_g726" The adpcm codec G726. The parameter defines the bits per sample.
-# The bits must be 2, 3, 4, or 5. (16, 24, 32, 40 kbits/s)
-# The given value will always include all modes with lower value.
-# "h323_gsm" GSM0610 and MicrosoftGSM codecs (not compatible with netmeeting)
-# The prameter defines the frame size. The frame range is 1 - 7.
-# "h323_lpc10" Codec with very low bandwith usage which can even be used on
-# slow internetconnections like 9600 kBit (about 300 bytes/s)
-# "h323_speex" Non standard Speex codec. The parameter defines the mode.
-# The mode range is 2 - 6.
-# The given value will always include all modes with lower value.
-# "h323_xspeex" Non standard XiphSpeex codec. The parameter defines the mode.
-# The mode range is 2 - 6.
-# The given value will always include all modes with lower value.
-# The priority of the codecs to use is given by it's order.
-# By default, no codec is used
-h323_gsm 4
-h323_g726 2
-#h323_lpc10
-#h323_speex 4
-#h323_xspeex 4
-h323_law 64
-
-# To allow incoming calls via H323, the following option is used:
-# "h323_icall [<prefix>]"
-# The given prefix is used for incoming calls which do not send any dialing
-# information. If you like to route calls to an extension, give extension
-# dialing as specified at numbering_ext.conf.
-# By default no calls are accepted.
-# Omit the prefix and it must be dialed by the caller.
-h323_icall 0
-
-# Specify the port to listen on incoming H323 connections.
-# The default value is 1720.
-#h323_port 1720
-
-# To register with a gatekeeper, the following option is used:
-# "h323_gatekeeper [<host or ip>]
-# If no parameter is given, the gatekeeper is searched automatically.
-#h323_gatekeeper
-
-# To use dtmf detection for call from or to ISDN, uncomment the keyword "dtmf".
-# By default dtmf detection is used. Note that dtmf detection needs cpu time.
-# Dtmf detection is essential when handling the call after connect using
-# keypad. (conferrence, callback, ect...)
-#nodtmf
-